We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass 1-inch push-fit ball valve with integral tube liner, silver finish

Wal-Rich

Wal-Rich 2012084 1" Ball Valve Push Fit Fitting

SKU CH-8YC2-0HV3J

Push-fit ball valve connects copper, CPVC and PEX without tools, rated 200 PSI and 200 °F, certified to ASSE 1061 and NSF 61 for potable water

  • TypeTube Fittings
  • Push-fit design speeds installation on copper, CPVC and PEX
  • DZR brass body resists dezincification for long service life
  • 200 PSI and 200 °F rating suits potable and hydronic systems
  • ASSE 1061, NSF 61, UPC, IPC and cUPC certifications confirm code compliance
  • Lead-free under federal law 111-380 for safe drinking water

1" Push-Fit Ball Valve

The Wal-Rich 2012084 is a 1-inch push-fit ball valve designed for residential and light-commercial plumbing. It connects copper CTS, CPVC and PEX tubing without soldering, crimping or glue. An integral tube liner is included to support PEX installations. The valve is constructed from DZR brass for corrosion resistance.

Replaces soldered or crimped valves

This fitting replaces traditional sweat or crimp ball valves where open-flame work or specialised tools are impractical. The push-fit design cuts installation time on repairs, remodels or tight spaces. The jump is worth it when speed, flameless joints or tool-free assembly are priorities on potable or hydronic systems.

200 PSI and 200 °F rated headroom

Certified to 200 PSI and 200 degrees Fahrenheit, the valve handles standard municipal pressure and typical hot-water temperatures with margin. It meets ASSE 1061, NSF 61, UPC, IPC and cUPC requirements and is listed by IAPMO for potable and hydronic distribution. Lead-free compliance follows federal law 111-380. Not for service conditions exceeding the stated pressure or temperature ratings.

Highlights

  • Push-fit design speeds installation on copper, CPVC and PEX
  • DZR brass body resists dezincification for long service life
  • 200 PSI and 200 °F rating suits potable and hydronic systems
  • ASSE 1061, NSF 61, UPC, IPC and cUPC certifications confirm code compliance
  • Lead-free under federal law 111-380 for safe drinking water

Specifications

TypeTube Fittings

Questions about this item

What tube sizes and materials does the 2012084 push-fit ball valve accept?

The valve connects to 1" copper CTS, CPVC and PEX tubing. An integral tube liner is included for PEX installations.

How do I install the EZ-Bite 2012084 and what step is commonly missed?

Cut the tube square, deburr the end, mark the insertion depth, then push the tube fully into the fitting until it stops. The most-missed step is failing to mark and verify full insertion depth.

When will the 2012084 valve need maintenance or replacement?

The DZR brass body and lead-free construction are certified to 200 PSI and 200 °F for potable and hydronic systems. No routine maintenance is required; replace only if leakage or actuation failure occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.