Vulcan
Vulcan OS1435-1500B Strip Heater 35 7/8 in 1500 W 240 V
A 35 7/8 in stainless-steel strip heater delivers 1500 W at 240 V with a 1200 °F maximum sheath temperature
- 1,500 W output at 240 V for strong heat
- Stainless steel sheath resists corrosion up to 1,200 °F
- 35 7/8 in length fits standard duct widths
- Surface-mount tabs with slotted holes simplify installation
- UL Recognised component meets recognised safety standards
Industrial Strip Heater 1500 W 240 V
The Vulcan OS1435-1500B is a stainless steel strip heater rated for 1500 watts at 240 volts. It measures 35 7/8 inches overall with a mounting dimension of 34 7/8 inches and includes mounting tabs with slotted holes. The unit is UL Recognized and built for surface mount installation in industrial heating applications.
Sustained Load Sheath Temperature 1200 Degrees F
Under continuous operation the sheath reaches a maximum temperature of 1200 degrees Fahrenheit at a watt density of 15 watts per square inch. The stainless steel sheath material resists oxidation at this temperature and the offset terminals remain accessible for wiring. Single phase power delivery ensures stable output during extended duty cycles without thermal cycling stress.
Pre Install Checks Voltage Phase Mounting
Verify that the supply voltage is 240 volts single phase and that the circuit can deliver 1500 watts. Confirm the mounting surface accommodates the 34 7/8 inch hole spacing and that 10 32 screws fit the 1/2 by 5/16 inch slotted holes. Ensure clearance for the offset terminals and that the environment does not exceed the sheath material limits.
Highlights
- 1,500 W output at 240 V for strong heat
- Stainless steel sheath resists corrosion up to 1,200 °F
- 35 7/8 in length fits standard duct widths
- Surface-mount tabs with slotted holes simplify installation
- UL Recognised component meets recognised safety standards
Specifications
| Brand | VULCAN |
|---|
Questions about this item
How much heat does the 1500 W strip heater emit during continuous operation?
The heater delivers 1500 watts at 240 volts with a watt density of 15 W/sq in and a maximum sheath temperature of 1200 °F.
What electrical supply and mounting hardware are required to install this heater?
A 240 V single-phase supply and 10-32 screws for the slotted mounting tabs (1/2 in by 5/16 in) are needed.
Will the 35 7/8 in stainless-steel sheath fit the 34 7/8 in mounting centres on my existing equipment?
Yes — the overall length is 35 7/8 in and the mounting dimension is 34 7/8 in, matching that centre spacing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
