Vulcan
Vulcan OS1412-350A Strip Heater 120V 12 in 350W 1200°F
A 12‑inch stainless‑steel strip heater delivers 350 W at 120 V with a 1200 °F maximum sheath temperature and UL‑Recognised construction
- Delivers 350 W at 120 V for reliable heating
- Reaches 1200 °F max sheath temperature for demanding applications
- Stainless steel sheath resists corrosion and extends service life
- 12 in overall length with 11 in mounting dimension fits standard spaces
- UL Recognized component meets recognised safety standards
Industrial Strip Heater 120V
The Vulcan OS1412-350A is a 12 inch stainless steel strip heater rated for 120 volt operation. It delivers 350 watts at a density of 16 watts per square inch. Surface mounting tabs with slotted holes simplify installation on machinery or process equipment. The unit is UL Recognised for safety compliance.
Voltage and Temperature Limits
This heater requires a 120 volt single phase power supply and reaches a maximum sheath temperature of 1200 degrees Fahrenheit. The 16 watts per square inch density suits applications needing moderate heat flux. Offset terminals and 10-32 screw connections define the wiring interface. No other voltage or phase options are available for this model.
12 Inch Length and Mounting Pattern
The overall length is 12 inches with an 11 inch mounting dimension between centres. Slotted holes measure 1/2 inch long by 5/16 inch wide to accept number 10 hardware. Buyers needing a different heated length, mounting span, or hole pattern cannot use this part.
Highlights
- Delivers 350 W at 120 V for reliable heating
- Reaches 1200 °F max sheath temperature for demanding applications
- Stainless steel sheath resists corrosion and extends service life
- 12 in overall length with 11 in mounting dimension fits standard spaces
- UL Recognized component meets recognised safety standards
Specifications
| Brand | VULCAN |
|---|
Questions about this item
How do I know the 12 in strip heater with 350 W at 120 V will fit my mounting layout?
The heater is 12 in overall with an 11 in mounting dimension, slotted holes 1/2 in long by 5/16 in wide, and uses 10-32 screws on the included mounting tabs.
What does the 1200 °F maximum sheath temperature mean for continuous operation?
The stainless steel sheath is rated to 1200 °F, and at 16 W/sq in watt density the 350 W element reaches that limit under steady-state conditions.
How does the UL Recognized rating affect installation on a 120 V single-phase circuit?
UL Recognized means the component meets UL safety requirements for its intended use; it must be installed in a suitable enclosure with proper over-current protection on the 120 V single-phase supply.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
