Vszerda
Vszerda ZD4115-S-A 12VDC 4-pin 30A 250VAC Relay
A 12 VDC, 4-pin relay switches 30 A at 250 VAC with a single normally open contact
- Handles 30 A loads for high-power switching
- 12 V DC coil suits common control circuits
- Single normally-open contact simplifies wiring
- 250 V AC rating fits mains applications
Relay for 12 V switching
The Vszerda ZD4115-S-A is a single normally open relay with a 4-pin layout designed for 12 VDC coil operation. It suits hobbyists and technicians who need to control a separate AC circuit from a low-voltage source.
Thermals noise and power
The coil draws modest current at 12 V and the contacts are rated for 30 A at 250 VAC. No active cooling is required and the device runs silently during normal switching.
Highlights
- Handles 30 A loads for high-power switching
- 12 V DC coil suits common control circuits
- Single normally-open contact simplifies wiring
- 250 V AC rating fits mains applications
Specifications
No published specifications for this item yet.
Questions about this item
How do I wire the 12 VDC coil and the 4-pin normally open contacts on the ZD4115-S-A relay?
Apply 12 VDC across the coil pins; the load circuit connects to the two normally open contact pins and closes when the coil is energised.
When should I replace the ZD4115-S-A relay in a 30 A 250 VAC switching application?
Replace it when the contacts show pitting, the coil fails to pull in at 12 VDC, or the switching cycle count approaches the manufacturer's rated endurance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



