We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver fiber-optic USB 3.0 extension cable 65 ft male-to-female connectors

Vszerda

Vszerda USB 3.0 Fiber Optical Extension Cable 65 ft Male to Female 5 Gbps Silver

SKU CH-6PQ1-DK6GC

A 65 ft fiber-optic USB 3.0 extension cable delivering 5 Gbps data transfer with low signal loss and electromagnetic interference resistance

  • ColorSilver
  • Cable Length65 ft
  • Length65 ft
  • Connector Number9
  • Terminal GenderMale-to-Female
  • Speed5 gigabits_per_second
  • 5 Gbps bandwidth for fast data transfers over distance
  • 65 ft fiber-optic reach without signal loss
  • immune to electromagnetic interference in industrial settings
  • 60 % lighter than copper while remaining bend-durable
  • plug-and-play with USB 3.0, 2.0 and 1.1 devices

Extended USB 3.0 Reach

This 65 ft fiber optical cable extends a USB 3.0 connection up to 5 Gbps over distances that copper cannot manage. It targets installers who need to place printers, scanners, webcams, hard drives or PlayStation consoles far from the host computer in monitoring rooms, conference spaces or music studios.

Copper Length Limit

The cable replaces standard copper USB 3.0 leads that lose signal integrity beyond a few metres. The jump is worth it when the device must sit 10, 20, 30 or 50 metres from the host and electromagnetic interference would corrupt a copper run.

Plug-and-Play Install

Connect the male Type-A plug to the host and the female Type-A port to the peripheral; no drivers are required. The only common issue is power: devices drawing more than 2 W need the built-in Micro-B auxiliary port fed, and hubs require an independent 900 mA supply for 10, 20 or 30 m runs or 600 mA for 50 m runs.

Highlights

  • 5 Gbps bandwidth for fast data transfers over distance
  • 65 ft fiber-optic reach without signal loss
  • immune to electromagnetic interference in industrial settings
  • 60 % lighter than copper while remaining bend-durable
  • plug-and-play with USB 3.0, 2.0 and 1.1 devices

Specifications

BrandFIBBR
ColorSilver
Cable Length65 ft
Length65 ft
Connector Number9
Terminal GenderMale-to-Female
Speed5 gigabits_per_second
Constructionfiber optic cable
FeaturesHigh Speed

Questions about this item

How much clearance does the 3.7 mm diameter cable need for routing through walls or conduit?

The cable measures 3.7 mm in diameter, so allow at least 10 mm clearance for bends and pulling through conduit without stressing the fiber cores.

Which end plugs into the host and which end receives the device, and what is the common mistake?

The male Type-A connector goes into the host (USB 3.0 or 3.1) and the female Type-A accepts the peripheral; the frequent error is reversing them, which breaks the signal path.

When will the auxiliary Micro-B power port be required, and what current should the supply deliver?

Use the Micro-B port when the connected device draws more than 2 W; for 10, 20 or 30 m lengths provide a 900 mA supply, and for 50 m provide a 600 mA supply.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.