We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black adapter cable with 20-pin motherboard connector, two USB 3.0 Type-A ports and full-profile PCI bracket

Vszerda

Vszerda USB 3.0 20-Pin to 2x USB 3.0 A Female Adapter Cable with PCI Bracket 1.64ft

SKU CH-0SBP-2RXXG

Adds two internal USB 3.0 Type-A ports to a motherboard 20-pin header using a 1.64ft cable with a PCI bracket

  • Connector TypeLighting Connector to USB A
  • Adds two USB 3.0 Type-A ports from a single 20-pin header
  • Full-profile PCI bracket mounts the ports securely at the rear panel
  • 64ft cable length reduces strain on the motherboard header
  • Compliant with USB 3.0 for data transfer up to 5Gbps
  • Connects internal card readers or drives directly to the motherboard

Internal USB 3.0 header expansion

This adapter converts a single motherboard 20-pin USB 3.0 header into two external Type-A ports mounted on a full-profile PCI bracket. It suits builders who need front-panel or rear-panel USB 3.0 connectivity without occupying a drive bay. The 1.64ft cable length provides flexible routing inside standard chassis.

USB 3.0 bandwidth ceiling

The link is limited to the USB 3.0 specification maximum of 5Gbps shared across both ports. Simultaneous high-throughput transfers on both connectors will divide available bandwidth. Devices requiring USB 3.1 Gen 2 or higher speeds cannot operate at their rated performance through this adapter.

Two-port capacity and headroom

Two internal devices such as card readers or drive docks can be connected directly to the motherboard header. The single 20-pin header supplies power and data for both ports, so total current draw must stay within the header's rated limit. Systems needing more than two additional USB 3.0 ports require a separate controller solution.

Highlights

  • Adds two USB 3.0 Type-A ports from a single 20-pin header
  • Full-profile PCI bracket mounts the ports securely at the rear panel
  • 64ft cable length reduces strain on the motherboard header
  • Compliant with USB 3.0 for data transfer up to 5Gbps
  • Connects internal card readers or drives directly to the motherboard

Specifications

Connector TypeLighting Connector to USB A

Questions about this item

Should I pick the black or blue version of the 20-pin to dual USB 3.0 adapter?

Both colour options provide the same 20-pin header input, two USB 3.0 Type-A female outputs and 1.64ft cable length; choose the colour that matches your case interior.

What does the 5Gbps headline speed mean once the cable is installed in my PC?

The 5Gbps rating is the USB 3.0 specification maximum; actual throughput depends on the connected devices, motherboard controller and system load, so real-world transfer rates will often be lower.

Which interface standard does the 20-pin header use and what does it cap in practice?

The 20-pin header follows the USB 3.0 internal connector standard, capping the link at 5Gbps and limiting you to two Type-A ports on the supplied PCI bracket.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.