We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda USB 2.0 9-pin to USB-A header cable 40cm

Vszerda

Vszerda USB 2.0 9-Pin to USB A Header Cable 40cm

SKU CH-6S9M-JHPA8

Connects a USB A device to a motherboard 9-pin header at 480 Mbps over 40 cm with plug-and-play operation

  • Connects USB devices to a 9-pin motherboard header
  • Supports USB 1.1 and USB 2.0 standards
  • 480 Mbps data rate for high-speed transfers
  • 40 cm cable length for easy internal routing
  • Plug and play with no driver installation required

USB 2.0 9-Pin Header Adapter

This cable bridges a standard USB Type-A female port to a motherboard 9-pin USB header. It lets builders connect internal USB devices such as Bluetooth modules, water-cooling controllers, RGB lighting hubs or small screens when the board lacks spare 9-pin connectors. The 40 cm length gives enough slack for routing behind the motherboard tray.

USB 1.1 and 2.0 speed limit

The link tops out at 480 Mbps, matching the USB 2.0 high-speed specification and remaining backward compatible with USB 1.1. Bandwidth is therefore limited to low-throughput peripherals; high-speed storage or multi-port hubs will saturate the connection. No driver installation is required on any supported operating system.

Single-port internal expansion

The adapter serves only one USB signal path, so it cannot split into two separate Type-A ports or feed a dual-port bracket. Builders needing multiple internal USB connections should look for a header splitter or a controller card instead. The jump from zero headers to one is worthwhile for single-device add-ons like fan controllers or status displays.

Highlights

  • Connects USB devices to a 9-pin motherboard header
  • Supports USB 1.1 and USB 2.0 standards
  • 480 Mbps data rate for high-speed transfers
  • 40 cm cable length for easy internal routing
  • Plug and play with no driver installation required

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick this 40 cm cable or a longer one for my motherboard header?

The 40 cm length is designed for internal routing; choose it when the USB device sits close to the 9-pin header, otherwise measure the path and select a longer cable.

What does the 480 Mbps rate mean when I plug a device into this cable?

It is the USB 2.0 high-speed ceiling; real throughput will be lower and depends on the connected device, but the cable itself does not reduce the 480 Mbps limit.

Which USB standard does the 9-pin header follow, and what does that cap?

The header follows USB 2.0, capping the link at 480 Mbps and limiting power to the USB 2.0 specification for low-consumption devices such as Bluetooth, water-cooling or RGB controllers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.