We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver metal box with five Ethernet ports on one side

Vszerda

Vszerda PoE 1 IN 4 OUT 4-Port Gigabit PoE+ Splitter 30W

SKU CH-XAS1-RYDMK

Expands one PoE port into four Gigabit ports delivering 30W each for IP cameras, WiFi 6 APs and VoIP phones over 328 ft

  • Uplink InterfaceRJ45
  • Primary PortsRJ45
  • Primary Port Speed1 gigabits_per_second
  • Primary Port TypeRJ45
  • Power,
  • Dimensions4.02 L x 2.68 W x 0.67 H inches
  • Expands one PoE port into four Gigabit connections
  • Delivers up to 30W per port for IP cameras and VoIP phones
  • IEEE 802.3at/af compliant for reliable power and data over Cat5e/6/7 cables
  • Auto-sensing allocates 15.4W or 30W only to compatible devices
  • Aluminium housing with noise-resistant PCB ensures interference-free operation

4-Port Gigabit PoE Splitter

The Vszerda PoE 1 IN 4 OUT splits a single PoE uplink into four RJ45 ports, each delivering up to 30W of power and 1000Mbps data to IP cameras, WiFi 6 access points, or VoIP phones. It draws power from an existing 802.3at/af PoE source and requires no configuration to operate.

Installers with one PoE uplink needing four

This unit suits installers who have a single PoE switch port or injector and must power four compatible devices up to 328 ft away over Cat5e or better cable. It is not for sites lacking any PoE source unless a separate 5-58V DC adapter is added, and it does not increase total power beyond the upstream budget.

30W per port PoE+ budget

Each of the four downlink ports negotiates 15.4W or 30W automatically according to the connected device class, while the aluminium chassis passes industrial EMC requirements. The per-port limit and the uplink power budget together decide whether your four devices can run simultaneously.

Highlights

  • Expands one PoE port into four Gigabit connections
  • Delivers up to 30W per port for IP cameras and VoIP phones
  • IEEE 802.3at/af compliant for reliable power and data over Cat5e/6/7 cables
  • Auto-sensing allocates 15.4W or 30W only to compatible devices
  • Aluminium housing with noise-resistant PCB ensures interference-free operation

Specifications

BrandCloss
ModelPoE 1 IN 4 OUT
Part NumberRS-104P
Uplink InterfaceRJ45
Primary PortsRJ45
Primary Port Speed1 gigabits_per_second
Primary Port TypeRJ45
Power,
Dimensions4.02 L x 2.68 W x 0.67 H inches
Weight135 grams
Temperature,

Questions about this item

How can I verify the Vszerda 4-port PoE splitter is powering my IP cameras correctly after installation?

Check the LED status indicators on each RJ45 port; they display real-time power negotiation showing 15.4 W for PoE or 30 W for PoE+ connections to compatible devices.

What comes with the PoE 1 IN 4 OUT unit and what must I purchase separately to run it from a non-PoE switch?

The aluminium-housed splitter with four Gigabit RJ45 ports is included; a 5–58 V DC adapter is required separately for non-PoE switch operation.

Which power mode should I select on the Vszerda splitter when connecting a mix of WiFi 6 access points and VoIP phones?

No manual selection is needed; the auto-sensing ports negotiate 15.4 W or 30 W per port based on each device’s IEEE 802.3at/af class.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.