We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with white PCI slot and gold PCIe edge connector

Vszerda

Vszerda PCIe X1 to PCI 32-bit Bridge Adapter PLX PEX8112

SKU CH-4QT2-47X10

Converts a PCI Express X1 slot into a 32-bit PCI slot using a PLX PEX8112 chipset for legacy device support

  • Adds a 32-bit PCI slot via PLX PEX8112 chipset
  • Works in PCIe X1, X4, X8 and X16 slots
  • No driver needed for Windows 2000, XP, Vista or Linux
  • Plug & Play design lets legacy PCI cards run immediately

PCIe X1 to 32-bit PCI Bridge

This adapter uses a PLX PEX8112 chipset to convert a single PCI Express X1 slot into a standard 32-bit PCI slot. It accepts X1, X4, X8 and X16 physical slots and operates without any driver installation. The card supports Windows 2000, NT, 2003, XP, Vista and Linux.

For adding one legacy PCI card

The board provides a single PCI connector, so it suits users who need to install exactly one older expansion card in a modern system. It is not suited for setups that require multiple legacy slots or for cards that need a different bus interface.

Highlights

  • Adds a 32-bit PCI slot via PLX PEX8112 chipset
  • Works in PCIe X1, X4, X8 and X16 slots
  • No driver needed for Windows 2000, XP, Vista or Linux
  • Plug & Play design lets legacy PCI cards run immediately

Specifications

No published specifications for this item yet.

Questions about this item

Does the adapter require a PCIe x1 slot, or can it also use x4, x8 or x16 slots?

The card plugs into any PCIe x1, x4, x8 or x16 slot and presents a single 32-bit PCI connector for legacy cards.

Is any driver installation needed before the adapter will recognise a legacy PCI card?

No driver is required; the PLX PEX8112 bridge is supported natively by Windows 2000, XP, Vista, 2003 and Linux.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.