We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda PCIe 4.0 16x to 4 M.2 NVME Adapter Card (No Heatsink)

SKU CH-H0WF-RJ3YE

Expands one PCIe 4.0 x16 slot into four full-speed M.2 NVMe bays supporting 2242, 2260, 2280 and 22110 drives, requiring motherboard bifurcation support

  • Adds four NVMe drives through one PCIe 16x slot
  • Requires motherboard with PCIe bifurcation support
  • Each slot runs at PCIe 4.0 x4 speed
  • Fits M.2 sizes 2242, 2260, 2280, 22110
  • No heatsink included — plan your own cooling

Four-slot NVME expansion card

This PCIe 4.0 adapter converts a single x16 slot into four M.2 NVME bays. It targets builders whose motherboard supports PCIe bifurcation and who need to add multiple high-speed drives without occupying extra expansion slots.

Capacity and headroom

Each of the four slots runs at PCIe 4.0 x4 for full Gen4 bandwidth per drive. The card accepts 2242, 2260, 2280 and 22110 form factors. It will not function on boards that lack a bifurcation option in the BIOS, and it provides no built-in cooling for the installed SSDs.

What the bundle changes

No heatsink is included, so sustained write workloads on all four drives may require case airflow or aftermarket cooling. The package supplies only the bare circuit board, leaving thermal management and mounting hardware entirely to the installer.

Highlights

  • Adds four NVMe drives through one PCIe 16x slot
  • Requires motherboard with PCIe bifurcation support
  • Each slot runs at PCIe 4.0 x4 speed
  • Fits M.2 sizes 2242, 2260, 2280, 22110
  • No heatsink included — plan your own cooling

Specifications

No published specifications for this item yet.

Questions about this item

Will this PCIe 4.0 x16 adapter run four NVMe drives at full speed on an older motherboard that only supports PCIe 3.0?

The card requires a motherboard with a free PCIe x16 slot and explicit Bifurcation support; without that BIOS option the four M.2 slots cannot operate at PCIe 4.0 x4 each, so an older platform lacking bifurcation will not run them at full speed.

How can I verify that all four M.2 slots are active and running at PCIe 4.0 x4 after installation?

Enter the motherboard BIOS and confirm the Bifurcation setting is set to x4x4x4x4 for the x16 slot, then boot the OS and check Device Manager or lspci — each NVMe drive should appear on its own x4 link at Gen 4.0 speeds.

Which SSD form factors fit the card out of the box, and do I need to buy mounting screws or heatsinks separately?

The board accepts 2242, 2260, 2280 and 22110 length NVMe drives; mounting screws for the M.2 standoffs are not included, and the card ships without any heatsink so you must supply your own cooling if desired.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.