We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 130mm axial fan with five blades, die-cast aluminium housing, sheet steel impeller, ball bearing motor

Vszerda

Vszerda No.W2S130-BM03-01 130mm axial fan 230VAC 46/47W

SKU CH-J1H6-E256J MPN No.W2S130-BM03-01

A 130 mm axial fan with metal impeller and housing moves air at 2700 or 3050 RPM from a 230 VAC supply

  • Runs at 230 VAC without extra power supplies
  • Ball bearing motor lasts longer than sleeve types
  • Operates from -25 °C to 70 °C ambient
  • 130 mm steel impeller moves air at 2700 / 3050 RPM
  • Die-cast aluminium housing weighs 1.1 kg and resists corrosion

Industrial 130 mm Axial Fan

The Vszerda No.W2S130-BM03-01 is a 130 mm axial fan built with a die-cast aluminium housing and a sheet-steel impeller. It runs on 230 VAC mains power and uses a ball-bearing motor rated for insulation class B. The unit weighs 1.1 kg and carries an IP20 protection rating for indoor industrial use.

Continuous Operation at Elevated Temperatures

Rated for ambient temperatures from -25 °C to 70 °C, the fan draws 0.27 A at 50 Hz and 0.31 A at 60 Hz while consuming 46 W or 47 W respectively. Speed stabilises at 2700 RPM on 50 Hz supplies and 3050 RPM on 60 Hz supplies, allowing sustained airflow without thermal throttling in enclosed cabinets.

Straightforward Panel Mounting

The all-metal construction adds 1.1 kg of mass, so the mounting surface must support the weight and resist vibration. Wiring connects directly to 230 VAC mains; no low-voltage control circuit is included. Installers should verify clearance for the 130 mm frame and ensure the IP20 rating matches the enclosure environment.

Highlights

  • Runs at 230 VAC without extra power supplies
  • Ball bearing motor lasts longer than sleeve types
  • Operates from -25 °C to 70 °C ambient
  • 130 mm steel impeller moves air at 2700 / 3050 RPM
  • Die-cast aluminium housing weighs 1.1 kg and resists corrosion

Specifications

No published specifications for this item yet.

Questions about this item

How loud and hot does the 130 mm 230 VAC fan run at 46 W continuous duty?

The motor draws 0.27 A at 50 Hz and 0.31 A at 60 Hz, spinning at 2 700 or 3 050 RPM with IP20 protection and Class B insulation rated for ambient temperatures from –25 °C to 70 °C.

What mounting hardware or wiring must I already have to install this axial fan?

The unit is a bare 130 mm die-cast aluminium housing with five steel blades and ball-bearing motor; you supply the 230 VAC 50/60 Hz supply cable, mounting screws and any finger guard or ducting required.

Will the 130 mm frame and 230 VAC supply match the cut-out and voltage of my existing W2S130-AB03-19 fan?

Yes — the supplier lists this model as a direct replacement for the W2S130-AB03-19, sharing the same 130 mm size, 230 VAC nominal voltage and 50/60 Hz frequency.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.