We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda Mini SAS HD SFF-8643 breakout cable with four SATA 7P female connectors, 39.37 inches

Vszerda

Vszerda Mini SAS HD SFF-8643 to 4 x SATA 7P Female Cable 39.37 Inches

SKU CH-J0GT-YV7GG

Converts a single SFF-8643 port to four SATA 7P connectors with 12Gbps per channel using 30AWG cable

  • 12 Gbps per channel for fast drive throughput
  • Single SFF-8643 port breaks out to four SATA 7P connectors
  • 30 AWG cable reduces interference and improves airflow
  • Low-profile flat-head connectors fit tight server chassis
  • 37 inch length suits common internal routing needs

Server Storage Connectivity

This Vszerda breakout cable converts a single Mini SAS HD SFF-8643 port into four SATA 7P female connectors. It lets administrators attach up to four SATA drives to one controller port inside a server or storage enclosure. The 39.37 inch length suits typical internal routing paths.

Upgrade From Single Drive Cables

Replacing individual SATA cables with this 1-to-4 assembly reduces cable count and simplifies drive tray wiring. The jump is worthwhile when a backplane or HBA offers an SFF-8643 interface and multiple drives must be connected without extra controllers. Each channel supports up to 12Gbps throughput.

Sustained Data Transfer

The 30AWG conductors maintain signal integrity across all four lanes during continuous read and write workloads. Flat-head connectors keep a low profile so airflow remains unobstructed in dense chassis. The cable is built for reliable operation in always-on server environments.

Highlights

  • 12 Gbps per channel for fast drive throughput
  • Single SFF-8643 port breaks out to four SATA 7P connectors
  • 30 AWG cable reduces interference and improves airflow
  • Low-profile flat-head connectors fit tight server chassis
  • 37 inch length suits common internal routing needs

Specifications

No published specifications for this item yet.

Questions about this item

Will the 30AWG cable fit through tight drive bays in a 1U server?

The 30AWG construction is thin and flexible, and the flat-head connectors keep the profile low for dense chassis routing.

How do I connect the SFF-8643 end to my RAID controller without damaging the latch?

Align the keyed Mini SAS HD plug with the controller port and push straight in until the latch clicks; do not force it at an angle.

When should I replace this breakout cable if I run drives at 12Gbps continuously?

Inspect the 30AWG wires and SATA 7P connectors periodically; replace the cable if you see cracked insulation, bent pins or intermittent drive drops.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.