We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with M.2 slot and SFF-8612 connector

Vszerda

Vszerda M.2 NVME PCIe X4 to OCulink SFF-8612 Riser Card

SKU CH-WFR8-J4MWQ

Connects an M-key NVMe drive to an OCulink SFF-8612 port with PCIe 3.0 and 4.0 support

  • Connect U.2 and U.3 SSDs via M.2 slot using OCulink SFF-8612 adapter
  • Run PCIe 3.0 and 4.0 NVMe drives at full speed on desktop platforms
  • Add high-performance storage without occupying PCIe expansion slots
  • Simple M-key M.2 to SFF-8612 conversion for flexible drive installation

M.2 to OCulink SFF-8612 adapter

This riser card connects an M.2 M-key NVMe SSD to an OCulink SFF-8612 port. It enables the use of U.2 or U.3 drives via the M.2 slot on a desktop motherboard. The adapter supports PCIe 3.0 and 4.0 signalling across four lanes. No additional drivers are required for the link itself.

For adding U.2 or U.3 storage via M.2

Builders who want to run enterprise U.2 or U.3 SSDs in a desktop M.2 slot will find this card suitable. It is not for systems lacking an M.2 M-key slot with PCIe wiring. Buyers needing a direct U.2 backplane connection or an external cable solution should look elsewhere.

Highlights

  • Connect U.2 and U.3 SSDs via M.2 slot using OCulink SFF-8612 adapter
  • Run PCIe 3.0 and 4.0 NVMe drives at full speed on desktop platforms
  • Add high-performance storage without occupying PCIe expansion slots
  • Simple M-key M.2 to SFF-8612 conversion for flexible drive installation

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the riser card is passing PCIe 4.0 speeds to my NVME drive?

Check the link speed in your motherboard BIOS or an OS tool such as lspci; it should report a Gen 4.0 x4 connection when a PCIe 4.0 drive is installed.

What comes in the box and do I need a separate cable for the OCulink SFF-8612 side?

The package includes the M.2 M-key to OCulink SFF-8612 riser card only; an OCulink SFF-8612 cable for the U.2/U.3 drive must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.