Vszerda
Vszerda M.2 B Key + mSATA to SATA 3.0 2.5 Inch Riser Board
Converts M.2 B-Key and mSATA SSDs to 2.5-inch SATA 3.0 drives
- Connect M.2 B-Key and mSATA SSDs to a 2.5 inch SATA 3.0 drive bay
- Use existing SATA cables and power for a simple storage upgrade
- Supports both NGFF M.2 SATA and mSATA form factors on one board
- Enables 2.5 inch drive installation in laptops or desktops with SATA 3.0 interface
M.2 B Key and mSATA to SATA 3.0 adapter
This adapter board converts M.2 B Key SATA SSDs and mSATA SSDs to a standard 2.5 inch SATA form factor. It enables the use of these drives in systems with 2.5 inch drive bays or SATA cables. The board supports the SATA 3.0 interface for data transfer. It is designed for NGFF M.2 SATA and mSATA solid state drives only.
Dual slot design adds installation flexibility
The riser board includes both an M.2 B Key slot and an mSATA slot on a single PCB. This allows builders to choose either drive type without needing separate adapters. The 2.5 inch dimensions match standard drive bay spacing for secure mounting. No extra software or drivers are required for operation.
Highlights
- Connect M.2 B-Key and mSATA SSDs to a 2.5 inch SATA 3.0 drive bay
- Use existing SATA cables and power for a simple storage upgrade
- Supports both NGFF M.2 SATA and mSATA form factors on one board
- Enables 2.5 inch drive installation in laptops or desktops with SATA 3.0 interface
Specifications
No published specifications for this item yet.
Questions about this item
Will the M.2 B Key slot or mSATA connector wear out after repeated SSD swaps?
Both connectors are rated for standard insertion cycles; no scheduled replacement is needed unless physical damage occurs.
What limits sustained throughput when an M.2 SATA or mSATA SSD is installed?
The SATA 3.0 interface caps maximum transfer speed at 6 Gb/s regardless of the drive's own rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



