We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 70 mm turbofan blower with black plastic frame and three-pin connector

Vszerda

Vszerda GB1207PTV3-A 12V 1.02W 70x70x25mm 3-pin fan

SKU CH-YYYB-XRHRY

A 70 mm square, 25 mm thick blower fan with fluid bearing rated for 50000 hours, running at 12 V and 1.02 W with a 3-pin speed-signal connector

  • Efficient cooling with 12 V 1.02 W power draw
  • Fluid bearing rated for 50 000 hours of operation
  • Compact 70 x 70 x 25 mm frame fits tight spaces
  • Three-pin connector includes speed-sensing signal line
  • Copper and aluminium heatsink aids heat dissipation

Compact 12 V blower for projector and case cooling

The Vszerda GB1207PTV3-A is a 70 mm square turbofan that runs on 12 V and draws 1.02 W. Its blower-style impeller pushes air through a narrow exhaust, making it suitable for projector lamp housings or tight computer-case spots where a conventional axial fan cannot fit.

Check voltage, mounting holes and header type

Verify that your device supplies 12 V DC and uses a three-pin header with a speed-sense wire. The fan measures 70 mm by 70 mm with a 25 mm thickness, so confirm the mounting pattern and clearance match the 7025 form factor before ordering.

Fluid-bearing rotor rated for 50 000 hours

A fluid dynamic bearing reduces friction and extends service life to 50 000 hours. The copper-and-aluminium heatsink base helps transfer heat from the motor, while the keyed three-pin plug ensures correct polarity and provides an RPM signal for monitoring.

Highlights

  • Efficient cooling with 12 V 1.02 W power draw
  • Fluid bearing rated for 50 000 hours of operation
  • Compact 70 x 70 x 25 mm frame fits tight spaces
  • Three-pin connector includes speed-sensing signal line
  • Copper and aluminium heatsink aids heat dissipation

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the box and is anything else needed to install the fan?

The fan ships with its own 3-pin plug and a third wire for speed monitoring, so it connects directly to a standard 3-pin header — no extra cables or adapters are required.

Which version of the 7025 blower should I choose for a projector or case?

This is the single 12 V, 1.02 W GB1207PTV3-A model with fluid bearing and 50000-hour rated life; no other voltage or capacity variants are offered.

What does the 1.02 W rating mean once the fan is running in my machine?

At 12 V the blower draws 1.02 W, delivering turbofan airflow through a 70×70×25 mm frame while the fluid bearing keeps noise low over its 50000-hour design life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.