Vszerda
Vszerda Dual Monitor HDMI KVM Switch 2 Computers 2 Monitors 8K@60Hz 4K@120Hz 4 USB 3.0 2.0 Audio SD TF
Share two monitors, four USB devices, audio and card readers between two computers at up to 8K 60 Hz or 4K 120 Hz
- Control two computers with one keyboard and mouse set
- Share two HDMI monitors in extended or duplicate display modes
- Supports 8K@60Hz and 4K@120Hz ultra-high-definition video output
- Four USB ports including two 3.0 ports at 5Gbps speed
- 5mm audio, microphone and SD/TF card reader built in
Dual-monitor KVM for two computers
This HDMI KVM switch lets you operate two computers from a single keyboard, mouse and dual-monitor setup. It shares four USB peripherals, 3.5 mm audio and microphone connections, plus SD and micro-SD card readers across both systems. Extended and duplicate display modes are supported for flexible workflows.
Passive cooling with external 12 V supply
The unit draws power from an included DC 12 V adapter and runs without internal fans, so it adds no audible noise to the desk. Each computer connects through two HDMI cables and one USB cable, keeping cable routing straightforward. Typical power consumption remains low during everyday switching and peripheral sharing.
8K 60 Hz and 4K 120 Hz video bandwidth
Maximum supported resolutions are 8K at 60 Hz and 4K at 120 Hz, with backward compatibility down to 1080P. Buyers who need higher refresh rates at 8K or support for three or more monitors should look elsewhere.
Highlights
- Control two computers with one keyboard and mouse set
- Share two HDMI monitors in extended or duplicate display modes
- Supports 8K@60Hz and 4K@120Hz ultra-high-definition video output
- Four USB ports including two 3.0 ports at 5Gbps speed
- 5mm audio, microphone and SD/TF card reader built in
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect both computers so the dual-monitor KVM works, and what step is often missed?
Each computer needs two HDMI cables plus one USB cable plugged into the KVM; the USB link is the step most people forget, without it keyboard and mouse switching will not function.
Which parts of this KVM are most likely to need replacement after extended use?
The mechanical switching button, the desktop controller cable, the 3.5 mm audio and microphone jacks, and the SD and Micro SD card slots see the most physical wear and are the items most likely to require replacement.
What resolution limit appears first when I run both monitors at high refresh for long periods?
The HDMI output caps at 8K@60Hz or 4K@120Hz, so 4K@120Hz is the highest refresh ceiling you will hit under sustained dual-monitor load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



