Vszerda
Vszerda DKM402C-USB3.0-HPZ KVM Switch 4 PC 2 Monitor 4K 60Hz
Lets four computers share two monitors at 4K 60 Hz with three USB 3.0 ports and audio
- Power Features5 volts
- Weight0.88 kilograms
- Control 4 computers with one keyboard, mouse and dual monitors
- Dual 4K 60Hz output via HDMI and DisplayPort per system
- Three USB 3.0 ports deliver 5 Gbps data and support peripherals
- Integrated 3.5 mm audio jack with DAC and separate mic input
- Wired remote and front-panel buttons give instant switching control
Vszerda DKM402C KVM Switch — 4 PCs, 2 Monitors
The Vszerda DKM402C-USB3.0-HPZ is a 4-port KVM switch that lets one keyboard, mouse and dual-monitor setup control four computers. Each system connects through both an HDMI and a DisplayPort input, so a single button press or the wired remote swaps the full dual-display workspace. The unit weighs 0.88 kg and runs from an included 5 V power adapter.
Suits multi-system desks; not for single-video PCs
Creators, engineers or traders who run four towers or laptops side-by-side and need simultaneous 4K 60 Hz on two screens will benefit. Buyers whose computers only provide one video output per machine cannot use the dual-monitor mode, because each PC must drive both an HDMI and a DisplayPort feed to fill the two outputs.
Dual 4K 60 Hz via HDMI + DisplayPort per port
The decisive specification is the dual-video input per computer: every one of the four ports accepts both HDMI and DisplayPort signals up to 4K at 60 Hz. If a source tops out at 1080p, the switch passes that lower resolution, but the second monitor stays dark unless the PC supplies a second active video output.
Highlights
- Control 4 computers with one keyboard, mouse and dual monitors
- Dual 4K 60Hz output via HDMI and DisplayPort per system
- Three USB 3.0 ports deliver 5 Gbps data and support peripherals
- Integrated 3.5 mm audio jack with DAC and separate mic input
- Wired remote and front-panel buttons give instant switching control
Specifications
| Brand | Yeemie Pro |
|---|---|
| Model | DKM402C-USB3.0-HPZ |
| Part Number | DKM402C-USB3.0-HPZ |
| Power Features | 5 volts |
| Weight | 0.88 kilograms |
Questions about this item
What cables and power supply do I need to connect the DKM402C-USB3.0-HPZ to four computers and two monitors?
You need a 5 V DC adapter for the unit, one DisplayPort and one HDMI cable per computer for video input, one USB cable per computer for keyboard/mouse data, and one DisplayPort and one HDMI cable from the switch to each monitor for video output.
Which wiring mistake stops the DKM402C-USB3.0-HPZ from switching between the four PCs?
Connecting a computer’s DisplayPort cable to DP IN 1 while its HDMI cable goes to HDMI IN 2 breaks the PC1/PC2 mapping; each PC must use the same numbered DP IN, HDMI IN and USB IN ports together.
When will the 3.5 mm audio and microphone jacks on the DKM402C-USB3.0-HPZ need attention?
Only if the internal DAC chip fails or the 3.5 mm sockets become physically damaged; otherwise the audio and microphone paths are passive and have no scheduled replacement interval.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation 4K60 HDMI Dual-Head KVM Switch 4 Port
$774.99
0.00933723BTC
In stock