Vszerda
Vszerda DB-002-RI VGA male to female 90 degree adapter
A right-angled VGA male-to-female adapter with screw locks, supporting 1080P at 60 Hz for tight spaces
- Connector TypeVGA
- Connector DetailVGA
- Constructioncopper
- Secure screw-on nuts lock the cable firmly in place
- Right-angled 90-degree design fits tight spaces behind monitors
- Supports 1080P at 60 Hz for sharp video
- Standard 15-pin VGA male-to-female connects PC to display
- Copper construction carries the signal reliably
Right-angle VGA adapter for tight spaces
The Vszerda DB-002-RI is a VGA male-to-female adapter with a 90-degree right-angled design. It lets you connect a VGA cable to a monitor, projector or graphics card when straight connectors would not fit. The D-Sub HDB15 pin layout matches the standard 15-pin interface found on most graphics cards and displays.
Passive copper construction with screw locks
The adapter uses copper conductors inside a black housing and adds captive nuts at both ends so the link stays secure. It carries 1080P@60hz video without active electronics, so it draws no power and adds no heat or noise to the system. The right-angle bend simply redirects the cable away from the port.
Fits standard VGA ports and frees rear clearance
Screw the male end into any female VGA port on a PC, LCD TV or projector, then attach your existing VGA cable to the female end. The 90-degree turn keeps the cable close to the chassis, saving space behind the device. It is not for users who need digital signalling such as HDMI or DisplayPort, or who require a straight-through gender changer.
Highlights
- Secure screw-on nuts lock the cable firmly in place
- Right-angled 90-degree design fits tight spaces behind monitors
- Supports 1080P at 60 Hz for sharp video
- Standard 15-pin VGA male-to-female connects PC to display
- Copper construction carries the signal reliably
Specifications
| Brand | chenyang |
|---|---|
| Connector Type | VGA |
| Connector Detail | VGA |
| Construction | copper |
Questions about this item
How do I install the Vszerda DB-002-RI 90-degree VGA adapter, and what step do people often miss?
Screw the male end into the source port and the female end onto the cable, then tighten both thumbscrews by hand; the step many skip is securing both sets of nuts so the right-angled body cannot rotate under cable tension.
What maintenance or replacement will the Vszerda DB-002-RI VGA adapter need later?
No scheduled maintenance is required; inspect the 15-pin D-sub contacts and thumbscrew threads periodically for dust or bent pins, and replace the adapter only if the housing cracks or a pin is damaged.
What limit appears first on the Vszerda DB-002-RI adapter during sustained 1080P@60hz use?
The copper conductors and passive design handle the 1080P@60hz signal continuously; the practical limit is mechanical — repeated mating cycles can wear the thumbscrew threads or deform the 15-pin interface before any signal degradation occurs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


