We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black plastic frame cooling fan with central rotor and two-wire connector

Vszerda

Vszerda D12A04LWSZC0 12V 0.24A 120x120x25mm 3200 rpm 2-Wire cooling fan

SKU CH-M44C-FZJJF MPN D12A04LWSZC0

12 V 0.24 A 120 mm square air-cooling fan spins at 3200 rpm with 36 dB noise and a two-wire connector

  • 12 V 0.24 A power draw keeps energy use low
  • 3200 rpm airflow cools components efficiently
  • 36 dB noise level runs quietly in the background
  • 120 x 120 x 25 mm frame fits standard 120 mm mounts
  • 2-wire connector enables quick, tool-free installation

12V 120mm 2-Wire Cooling Fan

The Vszerda D12A04LWSZC0 is a 120x120x25mm axial fan rated for 12V and 0.24A. It spins at 3200 rpm and produces 36dB of noise while moving air across heatsinks or chassis vents. The unit uses a simple two-wire power connector. It is supplied new and intended as a direct replacement for worn or failed cooling fans.

Suitable for Standard 120mm Mounts

This fan fits any 120mm mounting pattern that accepts a 25mm thick frame and a two-wire 12V supply. It serves builders repairing CPU coolers, case exhausts or industrial enclosures where the original spec matches these electrical and physical parameters. It is not for systems requiring PWM speed control, tachometer feedback or voltage levels other than 12V.

Simple Two-Wire Installation

Installation consists of aligning the four corner screw holes and connecting the two leads to a 12V header or molex adapter. The 25mm thickness clears most standard 120mm brackets without modification. The main issue arises when the host expects a three or four-wire connector for speed regulation; the fan will run at full 3200 rpm continuously in that scenario.

Highlights

  • 12 V 0.24 A power draw keeps energy use low
  • 3200 rpm airflow cools components efficiently
  • 36 dB noise level runs quietly in the background
  • 120 x 120 x 25 mm frame fits standard 120 mm mounts
  • 2-wire connector enables quick, tool-free installation

Specifications

No published specifications for this item yet.

Questions about this item

What power supply voltage and connector does the D12A04LWSZC0 require?

The fan runs on 12 V and draws 0.24 A through a 2-Wire connector, so you need a 12 V source with a matching two-pin header.

Will the 120x120x25 mm frame and 3200 rpm speed fit my existing COSTECH mounting points?

The 120 mm square footprint and 25 mm thickness match the standard 12025 form factor used by COSTECH, and the 3200 rpm rating delivers comparable airflow to the original unit.

How can I confirm the fan is operating correctly once installed?

Listen for a steady 36 dB airflow noise and verify the blades spin smoothly at the rated 3200 rpm; the 2-Wire design has no speed signal, so audible and visual checks are the primary indicators.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.