We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black KVM switch with front panel buttons and multiple rear ports

Vszerda

Vszerda 8K@60Hz 4-Port Dual Monitor KVM Switch (HDMI 2.1 + DP 1.4)

SKU CH-NRSS-P0QRS

Controls four computers with one keyboard, mouse and two monitors at up to 8K 60 Hz via HDMI 2.1 and DP 1.4

  • TypeAccessories
  • Control four computers with one keyboard, mouse and dual monitors
  • Supports up to 8K resolution at 60 Hz via DisplayPort 1.4 and HDMI 2.1
  • Four USB ports: three USB 3.0 at 5 Gbps and one USB 2.0 at 480 Mbps
  • Switch instantly using front-panel button or wired remote with LED status
  • Compatible with Windows, Linux, Mac, Unix, Ubuntu and Raspberry Pi

4-Port Dual Monitor KVM Switch

The Vszerda KVM switch lets four computers share one keyboard, one mouse and two monitors. Each system connects through one HDMI and one DisplayPort input plus a USB link. The switch supports DP 1.4 and HDMI 2.1, delivering up to 8K at 60 Hz with downward compatibility. Three USB 3.0 ports and one USB 2.0 port handle peripherals at 5 Gbps and 480 Mbps respectively.

Multi-system users needing dual-display

This unit suits operators who run four PCs or laptops that each drive two video outputs and want a single desk setup. It also works with DP or HDMI sources such as DVR or NVR recorders that have no USB signal. Buyers whose computers only provide a single video output cannot use the dual-monitor function. Users who need more than four connected systems should look at a larger switch.

Plug-and-play with wired remote

Installation is straightforward: connect the 5 V power adapter, link both monitor cables to the output ports, then attach each computer with its HDMI, DisplayPort and USB cables. Switching is done by the front-panel button or the wired remote. A common issue is forgetting that HDMI and DisplayPort cables are not included, so they must be sourced separately. The USB 2.0 port is intended for 2.4 GHz wireless dongles to avoid interference.

Highlights

  • Control four computers with one keyboard, mouse and dual monitors
  • Supports up to 8K resolution at 60 Hz via DisplayPort 1.4 and HDMI 2.1
  • Four USB ports: three USB 3.0 at 5 Gbps and one USB 2.0 at 480 Mbps
  • Switch instantly using front-panel button or wired remote with LED status
  • Compatible with Windows, Linux, Mac, Unix, Ubuntu and Raspberry Pi

Specifications

TypeAccessories

Questions about this item

What cables must I already have to connect each of the four computers to this KVM switch?

You need one HDMI cable and one DisplayPort cable plus one USB cable for every computer you want to connect, so four of each type in total.

Will my older 4K@60Hz monitors work with the DP 1.4 and HDMI 2.1 ports on this switch?

Yes, the switch is downward compatible and will pass 4K@60Hz or lower resolutions through its DP 1.4 and HDMI 2.1 interfaces.

How do I confirm the switch is passing an 8K@60Hz signal to both monitors after setup?

Check each monitor's on-screen information menu; both should report 8K resolution at 60 Hz when the connected PCs are set to that mode.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.