Vszerda
Vszerda 80Gbps USB 4 cable 3.3FT 120Gbps 8K 60Hz 240W Thunderbolt 5
Transfers data at 80Gbps, powers devices up to 240W and drives 8K 60Hz displays over 3.3FT, compatible with Thunderbolt
- Transfers a 10 GB file in one second with 80 Gbps data rate
- Charges up to 240 W at 48 V 5 A using PD 3.1 fast charging
- Drives dual 8K or triple 4K at 144 Hz for sharp multi-monitor setups
- Built-in E-Marker ensures safe and stable power and data delivery
- Works with Thunderbolt 5, 4, 3, USB4 and USB-C devices including MacBook M4 Pro
80 Gbps USB4 cable for fast workflows
This 3.3 ft cable delivers up to 80 Gbps data transfer and 240 W power delivery using USB4 Gen 3 and PD 3.1. It supports 8K at 60 Hz or triple 4K at 144 Hz, making it suited for creative pros moving large files and driving high-resolution displays.
Suits Thunderbolt 5 hosts needing full bandwidth
Works with Thunderbolt 5, Thunderbolt 4, Thunderbolt 3 and USB4 devices such as MacBook M4 Pro, docks, eGPUs and SSDs. Buyers whose hardware tops out at 40 Gbps will not see the 80 Gbps speed benefit and should check their host specification first.
Plug in and go with E-Marker safety
The built-in E-Marker chip handles power negotiation up to 48 V 5 A and ensures stable 80 Gbps signalling. No driver install is required. The 3.3 ft length limits desk reach, so measure your setup before ordering.
Highlights
- Transfers a 10 GB file in one second with 80 Gbps data rate
- Charges up to 240 W at 48 V 5 A using PD 3.1 fast charging
- Drives dual 8K or triple 4K at 144 Hz for sharp multi-monitor setups
- Built-in E-Marker ensures safe and stable power and data delivery
- Works with Thunderbolt 5, 4, 3, USB4 and USB-C devices including MacBook M4 Pro
Specifications
No published specifications for this item yet.
Questions about this item
What device port is needed to reach the 80Gbps data rate?
The host must provide a Thunderbolt 5 or USB4 Gen 3 port that supports 80Gbps signalling.
Will the cable still charge at 240W if I keep my 100W GaN charger?
No, the 240W maximum requires a 48V 5A PD 3.1 charger; the cable will fall back to the charger's 100W limit.
How can I confirm the cable is delivering 8K 60Hz to my monitor?
Check the display settings on the host; they should report 8K resolution at 60Hz when the link is active.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


