We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with eight red SATA ports and a silver low-profile bracket

Vszerda

Vszerda 8 Port SATA III PCIe 3.0 x1 Expansion Card ASM1064 Low Profile Bracket SI-PEX40165

SKU CH-12AX-4VPK0

Adds eight SATA III ports over a PCIe 3.0 x1 link using dual ASM1064 controllers for storage expansion or AHCI boot

  • Add eight SATA ports through a single PCIe 3.0 x1 slot
  • Each port delivers up to 6.0 Gbps for fast storage
  • Dual ASM1064 controllers provide stable non-RAID AHCI operation
  • Hot-plug and hot-swap support lets you change drives without shutdown
  • Native Command Queuing and Port Multiplier support improve drive efficiency

Add 8 SATA III ports via PCIe 3.0 x1

This Vszerda expansion card adds eight SATA III 6 Gbps ports to a desktop, server or NAS through a single PCIe 3.0 x1 slot. It uses dual ASMedia ASM1064 controllers for non-RAID AHCI operation. A low-profile bracket is included for small-form-factor chassis.

Bandwidth limited to one PCIe 3.0 lane

The card connects through a PCIe 3.0 x1 link that provides 8 Gbps of total upstream bandwidth. Eight SATA III ports each support 6 Gbps, so simultaneous full-speed transfers from multiple drives will saturate the single lane.

Eight drives at SATA III speed with AHCI boot

Each port runs at 6.0, 3.0 or 1.5 Gbps and supports hot-plug, hot-swap, NCQ and port multipliers. The AHCI 1.3 implementation allows boot from any attached drive. Builders needing hardware RAID or more than eight ports must choose a different controller.

Highlights

  • Add eight SATA ports through a single PCIe 3.0 x1 slot
  • Each port delivers up to 6.0 Gbps for fast storage
  • Dual ASM1064 controllers provide stable non-RAID AHCI operation
  • Hot-plug and hot-swap support lets you change drives without shutdown
  • Native Command Queuing and Port Multiplier support improve drive efficiency

Specifications

No published specifications for this item yet.

Questions about this item

What does the PCIe 3.0 x1 link mean for eight SATA III 6.0Gbps ports in a real machine?

The PCIe 3.0 x1 slot supplies 8Gbps total bandwidth shared across all eight ports; each SATA III port can still run at 6.0Gbps, but simultaneous traffic on multiple drives is limited by the 8Gbps upstream link.

Which SATA standard and AHCI revision does the dual ASM1064 controller comply with?

The card follows Serial ATA 3.0 and AHCI Spec. Rev. 1.3, supporting 6.0Gbps, 3.0Gbps and 1.5Gbps link speeds with NCQ, hot-plug and Port Multiplier.

What bracket and slot size are required to install the SI-PEX40165?

A low-profile bracket is included for slim chassis; the card fits any standard PCIe x1, x4, x8 or x16 slot.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.