We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 5-way PWM fan splitter cable with five 4-pin connectors and one motherboard plug

Vszerda

Vszerda 4-Pin PWM 5-Way Fan Hub Splitter Cable

SKU CH-M0Q7-ZKAWR

Splits one 4-pin PWM header into five fan connections for simultaneous speed control

  • Splits one 4-pin header into five fan connections
  • PWM control passes through to all attached fans
  • Works with both 4-pin PWM and 3-pin voltage-controlled fans
  • Extends power reach for cleaner internal cable routing

4-Pin PWM 5-Way Fan Splitter Hub

This Vszerda hub splits a single motherboard 4-pin PWM header into five fan connections. It supports both 4-pin PWM and 3-pin voltage-controlled fans, allowing centralised speed control through the board's fan curve. The cable is designed for internal case routing and draws power directly from the motherboard header.

Builders needing one header to drive multiple case

The splitter suits systems where a single CPU or chassis fan header must serve several fans. It is not suited for users who need per-fan RPM monitoring on every connector, as only the first port typically reports speed back to the motherboard. Builders whose fans exceed the header's current rating should consider a hub with an auxiliary power connector instead.

Highlights

  • Splits one 4-pin header into five fan connections
  • PWM control passes through to all attached fans
  • Works with both 4-pin PWM and 3-pin voltage-controlled fans
  • Extends power reach for cleaner internal cable routing

Specifications

No published specifications for this item yet.

Questions about this item

Does the hub draw extra power from the motherboard header when all five fans run continuously?

The hub passes the motherboard's 4-pin PWM signal to every connected fan while each fan draws its operating current directly from its own power pins, so the header only supplies the control signal, not the motor current.

What fan connectors must my case fans already have to plug into this splitter?

Each of the five output ports accepts a standard 4-pin PWM or 3-pin DC fan connector, so any case fan with either plug type will work without adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.