We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda 20 pin header female to USB-C cable with PCIe bracket 50cm

Vszerda

Vszerda 20 Pin Header Female to USB-C Cable with PCIe Bracket 50cm

SKU CH-VSBV-HX5F2

Converts a 19-pin USB 3.1 motherboard header to a Type-C port with a PCIe bracket, 50 cm cable

  • Connect front-panel Type-C devices via internal 19-pin header
  • 5 Gb/s transfer rate matches USB 3.1 Gen 1 speeds
  • PCIe bracket included for secure rear-panel mounting
  • 50 cm cable length fits most chassis layouts
  • Backward compatible with USB 3.0 and USB 2.0 devices

USB-C Front-Panel Adapter

This 20-pin internal header cable adds a USB 3.1 Type-C port to a desktop case. It connects a 19-pin motherboard header to an external female Type-C connector mounted on a PCIe-profile bracket. The 50 cm length suits standard ATX and micro-ATX chassis layouts. Builders upgrading older front-panel I/O will find it a direct fit.

5 Gbps Header Bandwidth

The adapter runs at 5 Gbps over the 19-pin USB 3.1 header and is not a 10 Gbps device. It remains fully backward compatible with USB 3.0 and USB 2.0 peripherals. This single throughput figure determines whether the port meets a given device’s speed requirement. Check the motherboard manual to confirm header availability.

Bracket-Mounted Installation

The included low-profile bracket secures the Type-C port to a rear expansion slot, leaving drive bays untouched. A free 19-pin header on the motherboard is the only internal requirement. No additional power cables or software drivers are needed for operation. The cable routes cleanly behind the motherboard tray in most cases.

Highlights

  • Connect front-panel Type-C devices via internal 19-pin header
  • 5 Gb/s transfer rate matches USB 3.1 Gen 1 speeds
  • PCIe bracket included for secure rear-panel mounting
  • 50 cm cable length fits most chassis layouts
  • Backward compatible with USB 3.0 and USB 2.0 devices

Specifications

No published specifications for this item yet.

Questions about this item

What does the 5 Gb/s transfer rate mean once the cable is installed in a desktop?

The connection will operate at USB 3.1 Gen 1 speed, so large file copies and external SSD transfers run at up to 5 Gb/s, while remaining compatible with USB 3.0 and USB 2.0 devices.

Which header standard does the 19-pin connector use and what does it limit in practice?

It plugs into a standard motherboard 19-pin USB 3.1 header, capping the external Type-C port at 5 Gb/s rather than 10 Gb/s.

What does the cable need to fit and mount inside a typical case?

A spare 19-pin USB header on the motherboard and one free PCIe bracket slot; the 50 cm cable reaches from the header to the rear panel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.