We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda 20 pin header female to USB-C cable with bracket 50cm

Vszerda

Vszerda 20 Pin Header Female to USB-C Cable 50cm

SKU CH-KPWM-Y19ST

Connects a 19-pin USB 3.1 header to a Type-C port with 5 Gb/s transfer and a PCIe bracket included

  • Adds a front-panel USB-C port via 19-pin header
  • 5 Gb/s transfer rate with USB 3.1 Gen 1
  • Backward compatible with USB 3.0 and 2.0 devices
  • Includes low-profile PCIe bracket for secure mounting
  • 50 cm cable length fits most chassis layouts

Front-panel USB-C adapter for desktop builders

This Vszerda cable converts a 19-pin USB header on the motherboard into a USB 3.1 Type-C port with 5 Gb/s transfer rate. The 50 cm length and included PCIe-profile bracket suit standard tower and small-form-factor cases. It is intended for builders adding a front-panel or rear-bracket USB-C connection without replacing the board.

Simple header plug and bracket mount

Align the 19-pin connector with the motherboard header key and press firmly until seated; the bracket then screws into a rear expansion slot. A common issue is reversed pin-1 orientation, which prevents detection — verify the keyed notch before applying force. The cable is backward compatible with USB 3.0 and USB 2.0 headers, though speed will match the slower standard.

Check header availability and bracket clearance

Confirm the motherboard has a spare 19-pin USB 3.0 or 3.1 header; some boards label it as 20-pin but only 19 pins are active. Ensure a full-height or low-profile bracket slot is free at the rear of the case. The adapter provides 5 Gb/s bandwidth, not 10 Gb/s, so devices requiring higher throughput will operate at reduced speed.

Highlights

  • Adds a front-panel USB-C port via 19-pin header
  • 5 Gb/s transfer rate with USB 3.1 Gen 1
  • Backward compatible with USB 3.0 and 2.0 devices
  • Includes low-profile PCIe bracket for secure mounting
  • 50 cm cable length fits most chassis layouts

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the 5 Gbps link is active after connecting the 19-pin header and bracket?

In Windows Device Manager the new port should appear under Universal Serial Bus controllers as a USB 3.1 device; a USB 3.0 flash drive plugged into the Type-C port will then operate at 5 Gbps speeds.

Which parts are included and what must I supply myself?

The package contains one 19-pin header to dual USB 3.1 Type-C cable (50 cm) and one PCIe profile bracket; you must provide a motherboard with a spare 19-pin USB 3.0/3.1 header.

The title mentions both 20-pin and 19-pin — which version should I choose?

The cable uses a 19-pin USB 3.1 header (5 Gbps) that fits the standard 20-pin keyed connector on modern motherboards; select this single version for any board with that header.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.