Vszerda
Vszerda 2-Port Dual-Monitor DP 1.4 KVM Switch 8K@30Hz 4K@144Hz 4×USB 2.0 Wired Remote
Lets two computers share dual monitors, keyboard, mouse and four USB 2.0 ports with push-button or wired remote switching at up to 8K@30Hz or 4K@144Hz
- Share two monitors between two PCs with a single keyboard and mouse set
- Switch instantly using the front push-button or the wired remote control
- Drive 8K at 30 Hz or 4K at 144 Hz for high-resolution workflows
- Four USB 2.0 ports keep printers, scanners and peripherals connected
- Driver-free operation on Windows, Linux and macOS with no external power needed
Dual-Monitor DP 1.4 KVM Switch
The Vszerda KVM switch lets two computers share two DisplayPort monitors, one keyboard, one mouse and four USB 2.0 peripherals. It supports extended and mirrored display modes and switches via a front push button or the included wired remote. No drivers or external power are required for Windows, Linux or macOS. Ideal for dual-screen workstations or streaming setups.
Check your computers before ordering
Each computer must provide two DisplayPort outputs and one USB-A or USB-B port for the KVM link. Connect two DP cables and one USB cable per computer to the corresponding input pairs on the switch. Verify that your graphics cards can drive the desired resolution over DisplayPort 1.4 or 1.2. Monitors and cables must also support the target refresh rate and bandwidth.
Thermals, noise and power draw
The unit draws power from the attached computers through the USB links and needs no separate power adapter. It runs silently with no fans or moving parts. In normal use the switch adds negligible load to the host USB ports and produces no audible noise. Operating temperatures stay within typical office ambient ranges without active cooling.
Highlights
- Share two monitors between two PCs with a single keyboard and mouse set
- Switch instantly using the front push-button or the wired remote control
- Drive 8K at 30 Hz or 4K at 144 Hz for high-resolution workflows
- Four USB 2.0 ports keep printers, scanners and peripherals connected
- Driver-free operation on Windows, Linux and macOS with no external power needed
Specifications
No published specifications for this item yet.
Questions about this item
What cables and accessories are included with the Vszerda KVM switch and what must I provide?
The package includes DP cables and USB cables for both computers plus a wired remote. Each computer needs two DP outputs and one USB-A/B port; you must supply monitors, keyboard, mouse and any USB 2.0 peripherals.
Should I choose the 8K 30 Hz or 4K 144 Hz capability for my dual-monitor setup?
The switch supports up to 8K at 30 Hz and 4K at 144 Hz; pick 8K 30 Hz for maximum pixel count on compatible monitors and GPUs, or 4K 144 Hz for high-refresh gaming. Both modes work simultaneously on the two outputs.
What does the 8K 30 Hz headline figure mean once the switch is connected to my PCs and monitors?
It indicates the maximum resolution and refresh rate the DP 1.4 link can carry; actual output depends on each computer's GPU, monitor EDID and cable quality, and the switch is backward compatible with DP 1.2 signals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



