We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda 15Pin to 22Pin Adapter Board for Raspberry Pi 5 DSI Display

SKU CH-M0PN-QNJZY

Connects a 15-pin camera cable to the 22-pin DSI display port on a Raspberry Pi 5

  • Connects 15-pin camera cables to 22-pin DSI displays
  • Adapts Raspberry Pi 5 display port for wider cable compatibility
  • Compact adapter board fits inside tight project enclosures
  • Enables camera and display integration on a single Pi 5 board

15-to-22 pin adapter for Raspberry Pi 5 DSI display

This adapter board connects a 15-pin camera or display cable to the 22-pin DSI connector on a Raspberry Pi 5. It lets builders use existing 15-pin ribbon cables with the newer board without soldering or custom wiring. The compact PCB sits inline and requires no external power or configuration.

Passive connection with no thermal or power impact

The board contains only copper traces and connectors, so it draws no measurable power and generates no heat of its own. There are no active components, fans or regulators that could add noise or thermal load. Normal system thermals and acoustics remain unchanged.

Highlights

  • Connects 15-pin camera cables to 22-pin DSI displays
  • Adapts Raspberry Pi 5 display port for wider cable compatibility
  • Compact adapter board fits inside tight project enclosures
  • Enables camera and display integration on a single Pi 5 board

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 15-pin side of the adapter to the Raspberry Pi 5 DSI port?

Align the 15-pin flex cable with the Pi 5 DSI connector contacts facing the board, insert it straight in, then flip the locking latch down to secure it.

When should I replace the 22-pin flex cable that plugs into the display side?

Replace the 22-pin cable if the display shows intermittent lines, colour shifts, or no image after reseating both ends of the adapter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.