We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
USB-C front-panel header cable with threaded nut head

Vszerda

Vszerda 10Gbps USB 3.1 Type C Front Panel Header Type E Mainboard Expansion Cable Nut Head

SKU CH-VRKH-7DA79

Adds a 10 Gbps USB 3.1 Type-C front-panel port via a motherboard Type-E header with a nut head for secure mounting

  • 10Gbps throughput via USB 3.1 Gen 2
  • Type-E header connects to modern motherboards
  • USB-C front-panel port for newer peripherals
  • Nut-head design secures cable in place

Front-panel USB-C expansion

This cable adds a USB 3.1 Type-C port to a motherboard front-panel header. It connects to a Type-E header and supports data rates up to 10 Gbps. The nut-head design secures the connector to the case cutout without extra hardware. Builders fitting a modern front-panel port will find the header match and locking nut convenient.

Sustained-transfer behaviour

The link runs at the rated 10 Gbps whenever the host controller and attached device both support USB 3.1 Gen 2. Throughput stays at that level for the duration of large file moves, limited only by the drive or controller on the other end. No thermal throttling or protocol overhead beyond the standard specification is introduced by the cable itself.

Highlights

  • 10Gbps throughput via USB 3.1 Gen 2
  • Type-E header connects to modern motherboards
  • USB-C front-panel port for newer peripherals
  • Nut-head design secures cable in place

Specifications

No published specifications for this item yet.

Questions about this item

Does the cable generate noticeable heat when transferring data at 10 Gbps continuously?

The cable is a passive copper assembly with no active components, so it does not produce measurable heat during sustained 10 Gbps transfers.

What motherboard header must my board provide for this Type E connector to work?

Your motherboard needs an internal USB 3.1 Gen 2 Type E front-panel header; the plug on this cable mates directly with that 19-pin keyed socket.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.