We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black VGA extender transmitter and receiver pair with galvanized alloy shells, HDB15 and RJ45 ports, 80mm x 45mm x 23mm each

VKBAND

VKBAND VGA Extender Over Cat6 328ft 1 Transmitter + 1 Receiver 2 in 1 accessory

SKU CH-35V9-Q81N3

Extends VGA and audio up to 328 ft over Cat6 with 1920 x 1440@60 Hz support and plug-and-play operation

  • Extends VGA and audio up to 328 ft over a single Cat6 cable
  • Supports 1920 × 1440 @ 60 Hz for sharp, detailed video
  • Plug-and-play operation with no TCP/IP configuration required
  • Galvanised alloy shell provides lightning, dust and static protection plus fast cooling
  • Includes two 5 V power adapters for 24-hour continuous use

What this VGA extender does

The VKBAND VGA extender sends a VGA signal up to 328 ft over a single Cat6 cable using one transmitter and one receiver. It supports resolutions up to 1920 x 1440 at 60 Hz and works with computers, laptops and DVRs. Audio is carried through a 3.5 mm connection on each unit. The pair is powered by two included DC 5 V adapters.

Installing the transmitter and receiver

Connect the source to the transmitter with a male-to-male VGA cable and a 3.5 mm audio cable. Link the transmitter and receiver with the Cat6 cable, then attach the display and speakers to the receiver. Plug both power adapters in and the link is active with no software or network configuration. The galvanized alloy shell provides lightning, dust and static protection while running continuously for 24 hours.

Check your cables and power before ordering

You must supply the VGA male-to-male cable and the 3.5 mm audio cables; they are not in the box. A solid Cat6 run of up to 328 ft is required between the two units. Both the transmitter and receiver need a free mains socket for their dedicated 5 V power adapters. The source and display must use standard HDB15 VGA and 3.5 mm audio ports.

Highlights

  • Extends VGA and audio up to 328 ft over a single Cat6 cable
  • Supports 1920 × 1440 @ 60 Hz for sharp, detailed video
  • Plug-and-play operation with no TCP/IP configuration required
  • Galvanised alloy shell provides lightning, dust and static protection plus fast cooling
  • Includes two 5 V power adapters for 24-hour continuous use

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the VGA extender is working after connecting the Cat6 cable and powering both units?

The sender and receiver LEDs will light up and the remote monitor will display the source image at up to 1920 x 1440@60Hz with audio through the 3.5 mm jacks.

What comes in the box and which cables must I provide myself?

The package includes one transmitter, one receiver, two DC 5 V power adapters and a user manual; you must supply a VGA male-to-male cable, a 3.5 mm audio cable and a Cat6 Ethernet cable.

Which resolution setting should I choose for the best image over the full 328 ft distance?

The extender supports up to 1920 x 1440@60Hz; set the source to that resolution for the sharpest picture across the maximum 100 m Cat6 run.

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

More in 2 in 1 Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.