We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White steel dual monitor wall mount with telescoping arms extended flat against wall

VIVO

VIVO White Steel Telescoping Dual Monitor Wall Mount 21-32" 22 lbs

SKU CH-NHVM-ZZGFG

Wall-mounted dual monitor arm holds 21 to 32 inch screens up to 22 lbs each on VESA 75x75mm or 100x100mm patterns with telescoping arms that adjust 10 to 15.5 inches for a flush fit

  • Fits 21" to 32" screens up to 22 lbs each with VESA 75x75mm or 100x100mm
  • Telescoping arms extend 10" to 15.5" for a flush-to-wall setup with overlapping strength
  • Full articulation: +90° to -90° tilt, 180° swivel, 360° rotation, portrait or landscape
  • Frees desk space by mounting two monitors on the wall with included cable clips
  • Simple installation using detachable VESA brackets and provided wood-stud hardware

Dual monitor wall mount for 21 to 32 inch screens

The VIVO white steel mount holds two monitors weighing up to 22 lbs each and fits VESA 75x75mm or 100x100mm patterns. It is built for users who want both displays on a single wall bracket at a fixed height. Buyers needing support for heavier panels or a third screen will need a different solution.

Telescoping arms create a flush wall profile

Arms extend from 10 to 15.5 inches and overlap for added rigidity, giving a total span of 20 to 30.5 inches between bracket centres. The pole measures 5 inches tall with a mounting base of 1.6 by 2.5 by 2.8 inches. Included hardware secures the base to wood studs and detachable VESA plates simplify screen attachment. Cable clips keep cords tidy along the arms.

Full articulation with no moving parts beyond

Each monitor tilts from +90° to -90°, swivels 180° and rotates 360° for portrait or landscape use. Height is set once along the centre pole during installation. The all-steel construction has no gas springs or motors, so operation stays silent and requires no power.

Highlights

  • Fits 21" to 32" screens up to 22 lbs each with VESA 75x75mm or 100x100mm
  • Telescoping arms extend 10" to 15.5" for a flush-to-wall setup with overlapping strength
  • Full articulation: +90° to -90° tilt, 180° swivel, 360° rotation, portrait or landscape
  • Frees desk space by mounting two monitors on the wall with included cable clips
  • Simple installation using detachable VESA brackets and provided wood-stud hardware

Specifications

BrandVIVO

Questions about this item

Does the VESA 75x75mm or 100x100mm standard limit the 22 lbs per screen capacity?

The mount supports 22 lbs per screen when the monitor matches the VESA 75x75mm or 100x100mm pattern; the standard itself does not reduce the stated weight limit.

What wall structure and clearance are required for the 1.6 x 2.5 x 2.8 mounting base?

The base mounts to wood studs using the included hardware; ensure the wall has studs spaced to match the base and enough depth for the telescoping arms to extend from 10 to 15.5 inches.

How do I attach the monitors using the detachable VESA brackets, and what step is often missed?

Fasten each bracket to the monitor's VESA holes first, then slide the brackets onto the arms until they click; the missed step is forgetting to tighten the bracket locking screws after positioning.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.