We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VIVO

VIVO Telescoping Extra Tall Triple Ultrawide 27-38 Monitor Desk Mount

SKU CH-3051-R49G2

A desk mount holds three 27 to 38 inch ultrawide monitors up to 22 lbs each on a 40 inch pole with telescoping arms spanning 24 to 39.5 inches for a flush wall setup

  • Holds three 27 to 38 ultrawides at 22 lbs each with 75x75mm or 100x100mm VESA
  • Telescoping arms adjust 12 to 19.8 inches and overlap for added strength
  • Arms span 24 to 39.5 inches straight out for a flush-to-wall desk edge
  • 40-inch pole enables height adjustment up to 39.3 inches for the center screen
  • Lower arms tilt ±90°, top bracket ±15°, with 180° swivel and 360° rotation

Triple Ultrawide Desk Mount

The VIVO STAND-TS3CT holds three 27 to 38 inch ultrawide monitors weighing up to 22 lbs each. It supports 75x75mm and 100x100mm VESA patterns on a 40 inch steel pole. The mount suits users building a wide simulation or productivity array who need a flush-to-wall profile.

Upgrading From Dual Arms

This mount replaces dual-arm stands when a third ultrawide is added to the workflow. The jump is worth it when the desk depth is limited because telescoping arms slide to 12 to 19.8 inches and span 24 to 39.5 inches bracket-to-bracket, keeping the rearmost edge aligned with the wall. Overlapping arm sections reduce joint count for a stiffer hold on heavy ultrawides.

Practical Limits Of The VESA Interface

The 75x75mm and 100x100mm VESA standard caps per-screen weight at 22 lbs and restricts the top bracket tilt to +15° to -15° while lower arms allow +90° to -90°. Maximum centre-screen height reaches 39.3 inches. Desks thicker than 3.25 inches cannot be clamped, and screens wider than 38 inches or heavier than 22 lbs exceed the rated capacity.

Highlights

  • Holds three 27 to 38 ultrawides at 22 lbs each with 75x75mm or 100x100mm VESA
  • Telescoping arms adjust 12 to 19.8 inches and overlap for added strength
  • Arms span 24 to 39.5 inches straight out for a flush-to-wall desk edge
  • 40-inch pole enables height adjustment up to 39.3 inches for the center screen
  • Lower arms tilt ±90°, top bracket ±15°, with 180° swivel and 360° rotation

Specifications

BrandVIVO

Questions about this item

What VESA patterns and weight limit does the mount support for each 27 to 38 ultrawide monitor?

Each bracket accepts 75x75mm or 100x100mm VESA patterns and holds up to 22 lbs per screen.

How do the telescoping arms attach to the centre pole, and what is the common alignment mistake?

The arms slide into the pole clamps at any height; the step often missed is levelling all three brackets before tightening the clamp bolts.

When should the pole-mounted gas-spring tension be checked or the cable clips replaced?

Re-check spring tension after the first week of use and whenever a monitor is swapped; replace plastic cable clips if they become brittle or lose grip.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.