We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White steel single-monitor desk mount with 31" pole, C-clamp base, articulated arm and cable clips

VIVO

VIVO STAND-V001TW White Single Monitor Desk Mount Extra Tall 31" Pole

SKU CH-S1QB-V86J9

Extra-tall 31-inch pole mount holds screens 13 to 32 inches up to 22 lbs with full tilt, swivel, rotation and height adjustment

  • Fits 13 to 32 inch screens and ultrawide up to 38 inch under 22 lbs
  • 31 inch pole gives height range for sitting or standing workstations
  • +45 to -45 tilt, 180 swivel, 360 rotation and portrait or landscape orientation
  • C-clamp up to 3.25 thick or grommet up to 3 thick with no drilling required
  • Integrated cable clips on arm and pole keep power and AV cables tidy

Extra Tall Pole for Sit-Stand Use

The 31-inch center pole lets you raise the monitor high enough for standing work or lower it for seated tasks. Height adjustment slides along the pole without steps, so you can set the exact eye level you need. The white steel construction resists scratches and supports screens up to 22 lbs. It fits displays from 13 to 32 inches and ultrawide models up to 38 inches if they stay under the weight limit.

VESA and Desk Thickness Limits

The mount accepts only 75x75 mm or 100x100 mm VESA patterns, so monitors with proprietary hole spacing cannot attach. Maximum desktop thickness is 3.25 inches for the C-clamp and 3 inches for the grommet option; thicker surfaces will not clamp securely. The arm extends 15.5 inches from the pole, which may not reach across very deep desks. Tilt range is +45 to -45 degrees, swivel 180 degrees, and rotation 360 degrees.

Simple Two-Step Installation

Bolt the VESA plate to the monitor, then fasten the C-clamp or grommet base to the desk and slide the arm onto the pole. Most problems come from forgetting to tighten each joint after positioning, which lets the screen drift over time. Cable clips on the arm and pole snap off if pulled too hard, so route cables with slack. Heavier ultrawide screens may need periodic re-tightening of the tilt tension.

Highlights

  • Fits 13 to 32 inch screens and ultrawide up to 38 inch under 22 lbs
  • 31 inch pole gives height range for sitting or standing workstations
  • +45 to -45 tilt, 180 swivel, 360 rotation and portrait or landscape orientation
  • C-clamp up to 3.25 thick or grommet up to 3 thick with no drilling required
  • Integrated cable clips on arm and pole keep power and AV cables tidy

Specifications

BrandVIVO

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the 31" pole or a shorter version for my sit-stand desk?

The 31" pole gives extra height range so you can raise the screen to standing eye level and lower it for sitting without hitting the desk surface.

What does the 22 lb weight limit mean when I mount my 32" monitor?

Your monitor must weigh 22 lbs or less; the mount supports screens up to 32" and ultrawides up to 38" provided they stay under that weight.

How thick a desktop can the C-clamp and grommet actually grip?

The C-clamp fits tops up to 3.25 thick and the grommet mount up to 3 thick, both securing the 31" steel pole firmly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.