We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel and aluminum desk mount with tall center pole, articulating arm and C-clamp base

VIVO

VIVO Single Ultrawide Monitor Tall Desk Mount STAND-V157R 57

SKU CH-KETY-40NYA

Holds ultrawide screens up to 57 inches and 59.4 lbs with full tilt, swivel, rotation and pole height adjustment, plus cable clips and C-clamp or grommet mounting

  • Supports ultrawide monitors up to 57 inches and 59.4 lbs
  • Tilt plus 55 to minus 30 degrees, 130 degree swivel, 270 degree rotation
  • Height adjustable along 31.25 inch pole, max screen center 28.75 inches
  • Detachable VESA plate fits 75x75, 100x100, 200x100, 100x200, 200x200 mm
  • Clamps desks up to 1.45 inches thick or grommet mounts up to 1.25 inches

Ultrawide Mount for Screens up to 57

The VIVO STAND-V157R is a single monitor arm built for ultrawide displays up to 57 inches and 59.4 lbs. It supports flat or curved panels with VESA patterns from 75x75 mm to 200x200 mm. The steel and aluminum construction clamps to desks up to 1.45 inches thick or mounts through a grommet hole up to 1.25 inches thick. Buyers whose screens exceed the 57-inch limit or 59.4 lb capacity need a different solution.

Detachable VESA Plate and Cable Clips

A detachable VESA plate lets you attach the monitor away from the pole, then slide it on for final tightening. All hardware and instructions are included. Integrated cable clips on the 31.25-inch center pole route power and video cords. The C-clamp requires a desk edge thick enough for the 0.4 to 1.45-inch range; thinner or thicker tops will not hold securely. Grommet mounting needs a pre-drilled hole and the same thickness window.

59.4 lb Weight Capacity Decides Fit

The single figure that determines whether this mount works is the 4.4 to 59.4 lb weight range. Screens lighter than 4.4 lbs may not counterbalance the arm; screens heavier than 59.4 lbs will overload it. The pole allows height adjustment up to a 28.75-inch center-screen height, with 4.5 inches of maximum extension, +55° to -30° tilt, 130° swivel and 270° rotation. If your monitor falls outside the weight window, this mount is not suitable.

Highlights

  • Supports ultrawide monitors up to 57 inches and 59.4 lbs
  • Tilt plus 55 to minus 30 degrees, 130 degree swivel, 270 degree rotation
  • Height adjustable along 31.25 inch pole, max screen center 28.75 inches
  • Detachable VESA plate fits 75x75, 100x100, 200x100, 100x200, 200x200 mm
  • Clamps desks up to 1.45 inches thick or grommet mounts up to 1.25 inches

Specifications

BrandVIVO

Questions about this item

How can I verify the STAND-V157R is holding my 57 inch ultrawide at the correct 28.75 inch center height after installation?

Measure from the desk surface to the middle of the screen; it should read 28.75 inches when the pole is set to its highest position, and the arm should stay fixed without drifting once the joints are tightened.

What hardware is included with the VIVO mount and what must I purchase separately to use the grommet option?

The box contains the steel and aluminum arm, detachable VESA plate for 75x75 through 200x200 patterns, C-clamp for desks 0.4 to 1.45 inches thick, cable clips, and all screws and instructions; the grommet mount for desks up to 1.25 inches thick is sold separately.

Which VESA pattern on my 55 inch curved TV matches the STAND-V157R, and does the 59.4 lb limit cover it?

The mount accepts 75x75, 100x100, 200x100, 100x200, and 200x200 mm patterns; if your TV uses one of those and weighs between 4.4 and 59.4 lbs, the mount will support it.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.