We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Reclaimed wood top with white steel frame, three-piece curved desktop, electric lift legs, touch controller visible

VIVO

VIVO Reclaimed Wood / White 63 x 32 Electric Standing Desk

SKU CH-SA02-SB4BE

A 63.1 x 31.5 inch three-piece particle-board top with electric height adjustment from 24.6 to 50.2 inches and a 220 lb steel frame capacity

  • Smooth sit-stand shifts with a 24.6 to 50.2 height range
  • Spacious 63.1 x 31.5 three-piece top fits monitors and accessories
  • Sturdy steel frame supports 220 lbs for stable equipment mounting
  • Touch-screen controller stores four memory presets and a timer
  • Curved tabletop includes cable-management openings for a tidy surface

Workstation for Active Sitting and Standing

This electric height-adjustable desk lets users alternate between sitting and standing positions throughout the workday. It suits home offices, corporate workspaces, and anyone who wants a motorised frame with a touch-screen controller that stores four height presets and includes a timer reminder. The complete kit arrives with a three-piece tabletop and all necessary hardware for assembly.

Tabletop Must Use All Three Sections

The 63.1 by 31.5 inch surface narrows to 28 inches at the centre curve and is built from 0.75 inch thick scratch-resistant particle board. The design requires all three sections to be installed together; the top cannot be used as a single piece or with sections omitted. Cable management openings are cut into the desktop for routing wires.

Quiet Single Motor With 220 lb Capacity

The steel frame uses a single electric motor driving three-stage telescopic legs to move the desk between 24.6 and 50.2 inches at a maximum speed of one inch per second. Operation stays quiet during normal adjustments. The structure supports up to 220 lbs of equipment and runs on a universal 110 to 240 volt power input.

Highlights

  • Smooth sit-stand shifts with a 24.6 to 50.2 height range
  • Spacious 63.1 x 31.5 three-piece top fits monitors and accessories
  • Sturdy steel frame supports 220 lbs for stable equipment mounting
  • Touch-screen controller stores four memory presets and a timer
  • Curved tabletop includes cable-management openings for a tidy surface

Specifications

No published specifications for this item yet.

Questions about this item

How much usable width does the 28-inch center section give me for a monitor arm?

The tabletop measures 31.5 inches deep at the sides and narrows to 28 inches at the curved centre, so a clamp or grommet mount has at least 28 inches of clear width there.

What voltage range does the single motor accept and what speed does it move?

The motor runs on 110–240 V input and lifts or lowers the frame at 1 inch per second across the 24.6 to 50.2 inch range.

Will the 23.5 x 2.7 inch feet fit under a standard 24-inch deep cabinet?

Each foot is 23.5 inches deep and 2.7 inches wide, so it needs a clearance slightly under 24 inches front-to-back.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.