VIVO
VIVO Electric Stand-Up Desk 63 x 32 Inches Black Carbon Fiber Top White Frame 220 lbs Capacity
Height-adjustable electric desk with a three-piece 63.1 x 31.5 inch carbon-fibre top, 29 to 48.2 inch range, and 220 lbs capacity
- Smooth sit-to-stand motion with 25 mm/s electric motor
- Large 63.1 x 31.5 inch carbon-fiber tabletop fits multi-monitor setups
- Steel frame supports 220 lbs for rock-steady stability
- Height adjusts 29 to 48.2 inches via 4 memory presets
- Scratch-resistant 0.75 inch particle-board top resists daily wear
Active Workstation
The VIVO electric standing desk converts a standard workstation into a sit-stand setup with a single motor that raises the surface from 29 to 48.2 inches. A push-button controller stores four memory presets so each user can recall a preferred height instantly. The 63.1 by 31.5 inch carbon-fiber tabletop ships in three sections that must all be assembled.
Quiet Operation
The frame draws only 1 W/H in standby and moves at a maximum speed of 25 mm/s, keeping motor noise low during everyday adjustments. All-steel legs and a particle-board top rated for 220 lbs provide a stable platform that does not wobble at typical working heights. The 23.5 by 2.7 inch feet distribute weight evenly across the floor.
Sustained Load Stability
Under the full 220 lb capacity the single-motor frame maintains consistent lift speed without slowing or overheating during repeated cycles. The telescopic legs hold position securely even when the desktop is loaded with multiple monitors and accessories at the 48.2 inch maximum height. The 0.75 inch thick top resists sag across the 63.1 inch width, including the 28 inch center section.
Highlights
- Smooth sit-to-stand motion with 25 mm/s electric motor
- Large 63.1 x 31.5 inch carbon-fiber tabletop fits multi-monitor setups
- Steel frame supports 220 lbs for rock-steady stability
- Height adjusts 29 to 48.2 inches via 4 memory presets
- Scratch-resistant 0.75 inch particle-board top resists daily wear
Specifications
No published specifications for this item yet.
Questions about this item
How do I attach the three tabletop sections to the frame without misaligning the pre-drilled holes?
Bolt all three particle-board sections together first using the supplied hardware, then mount the assembled 63.1 x 31.5 inch top onto the steel frame; the centre section narrows to 28 inches so hole spacing only matches when the full top is joined before installation.
What part will need replacement first if the motor or controller fails after the warranty period?
The single electric motor and push-button controller with four memory presets are integrated into the frame; either component can be swapped individually using VIVO replacement kits without replacing the whole desk.
At what load does the 25 mm/s lifting speed start to drop during repeated height changes?
The motor maintains its rated 25 mm/s speed up to the 220 lb capacity; sustained cycling at or near that limit will not reduce speed, but exceeding 220 lbs triggers the overload protection and stops movement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



