We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular electric standing desk with one-piece top and telescopic steel legs

VIVO

VIVO Electric 48" x 30" Standing Desk Black office furniture

SKU CH-VSQM-7KAEV

A 47.3 x 29.5 inch scratch-resistant top sits on a single-motor steel frame that lifts 29.2 to 48.4 inches at 25 mm/s, holds 220 lbs, and remembers four heights with a push-button controller

  • Smooth sit-to-stand motion with single-motor electric adjustment
  • 3 x 29.5 cm one-piece scratch-resistant top
  • Height range 29.2 to 48.4 cm via telescopic legs
  • All-steel frame supports 220 lbs for stable setups
  • Push-button controller with four memory presets included

Product purpose

This electric standing desk suits home-office workers who want to alternate between sitting and standing during long sessions. The 47.3 by 29.5 inch one-piece top holds dual monitors and accessories without seam breaks. The steel frame lifts up to 220 lbs, so heavy monitor arms and laptops remain stable at any height.

Installation experience

Assembly uses the included hardware and instructions; the push-button controller stores four memory presets for repeatable heights. The single motor moves at 25 mm per second between 29.2 and 48.4 inches. The 23.5 by 2.7 inch feet need a level floor; uneven surfaces can cause wobble at full extension. Cable management is not built in, so plan routing before tightening the frame bolts.

Pre-purchase checks

Verify that your room accommodates the 47.3 inch width and 29.5 inch depth plus clearance for the height range. Confirm the floor can support the combined weight of desk and equipment within the 220 lb limit. Ensure a nearby mains outlet reaches the motor without an extension lead. The particle-board top is scratch-resistant but not waterproof; avoid direct liquid exposure.

Highlights

  • Smooth sit-to-stand motion with single-motor electric adjustment
  • 3 x 29.5 cm one-piece scratch-resistant top
  • Height range 29.2 to 48.4 cm via telescopic legs
  • All-steel frame supports 220 lbs for stable setups
  • Push-button controller with four memory presets included

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the desk moves smoothly through its full 29.2 to 48.4 height range after assembly?

Use the push-button controller to run the desk from the lowest to the highest position; the single motor should move at 25mm/s without binding or unusual noise, and the 4 memory presets will store your preferred heights once programmed.

What components are included and what must I supply myself?

The box contains the 47.3 x 29.5 one-piece particle-board top, the all-steel electric frame with telescopic legs, push-button controller with 4 memory presets, and all hardware plus instructions; you only need to provide a power outlet and the monitors or accessories you plan to place on the 220 lbs capacity surface.

Should I choose the 48 x 30 size or a different variant for dual monitors?

The 47.3 x 29.5 top is the only size described in this listing; its extra-deep, seam-free surface gives ample room for dual-monitor arms and accessories while the frame supports up to 220 lbs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.