We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver dual-pole steel stand holding three ultrawide monitors on adjustable arms

VIVO

VIVO Dual-Pole Triple Ultrawide Monitor Mount 49" Centre 38" Side

SKU CH-XBES-RSX6C

Holds three ultrawide monitors up to 49 inches centre and 38 inches sides with full tilt, swivel, rotation and height adjustment on a dual-pole stand

  • Fits 49" centre and 38" side ultrawides for expansive multi-screen workflows
  • Centre arm holds 48.4 lb curved or 59.4 lb flat panels with secure VESA mounting
  • Side brackets tilt ±90° and rotate 360° for flexible portrait or landscape orientation
  • Dual-pole steel frame pushes large curved screens back against the wall for a low-profile look
  • Two heavy-duty C-clamps grip desktops 0.4–3.3" thick on straight or corner desks

Triple Ultrawide Mount

This dual-pole desk mount holds three ultrawide monitors at once. The centre bracket accepts screens up to 49 inches while each side bracket fits panels up to 38 inches. It is built for users who want a wide, immersive workspace without multiple separate stands. Flat or curved displays are both supported.

Installation and Common Issues

Two heavy-duty C-clamps secure the poles to desktops between .4 and 3.3 inches thick, working on straight or corner desks. Height is adjusted by sliding brackets along the poles. The centre arm tilts +55° to -25°; side arms tilt a full ±90°. All joints swivel and rotate 360°. Over-tightening VESA screws can strip the monitor’s mounting holes.

Pre-Order Checks

Verify each monitor’s VESA pattern: the centre bracket fits 75x75, 100x100, 200x100, 100x200 and 200x200 mm; side brackets only fit 75x75 and 100x100 mm. Confirm the centre screen weighs no more than 48.4 lbs if curved or 59.4 lbs if flat. Each side screen must stay at or below 17.6 lbs. Ensure your desk thickness falls within the clamp range.

Highlights

  • Fits 49" centre and 38" side ultrawides for expansive multi-screen workflows
  • Centre arm holds 48.4 lb curved or 59.4 lb flat panels with secure VESA mounting
  • Side brackets tilt ±90° and rotate 360° for flexible portrait or landscape orientation
  • Dual-pole steel frame pushes large curved screens back against the wall for a low-profile look
  • Two heavy-duty C-clamps grip desktops 0.4–3.3" thick on straight or corner desks

Specifications

BrandVIVO

Questions about this item

How can I verify the centre ultrawide is level and secure after mounting it on the 49-inch bracket?

The centre bracket tilts from +55° to -25° and rotates 360°. Tighten every joint until the 49-inch screen stays fixed at your chosen angle without drifting.

What hardware is included for mounting and which items must I source separately?

Two heavy-duty C-clamps for desktops 0.4 to 3.3 inches thick, both poles, three VESA brackets (75×75, 100×100, 200×100, 100×200, 200×200 centre; 75×75, 100×100 sides), and cable-management clips are supplied. Monitor screws are not included.

Which VESA pattern should I match when choosing between the centre and side brackets for my ultrawides?

Use the centre bracket (75×75, 100×100, 200×100, 100×200, 200×200) for screens up to 49 inches and 59.4 lbs flat or 48.4 lbs curved. Use each side bracket (75×75, 100×100) for screens up to 38 inches and 17.6 lbs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.