We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White metal drop ceiling projector mount with scissor clamp, adjustable arms, tilt and swivel joints, hangs 6.3 inches

VIVO

VIVO Drop Ceiling Projector Mount Scissor Clamp 29.7 lb

SKU CH-50EJ-KG59B

Drop-ceiling projector mount with scissor clamp holds 29.7 lb and adjusts 15° tilt, 15° swivel and 360° rotation

  • Install on drop-ceiling grids with the scissor clamp design
  • Holds projectors up to 29.7 lb for secure mounting
  • Adjustable arms fit mounting patterns from 5.25 to 12.5 inches
  • Tilt and swivel ±15° plus 360° rotation for optimal viewing
  • Arms remove to suit mini projectors with 1.5 inch spacing

Drop Ceiling Projector Mount

The VIVO scissor clamp secures a projector to a suspended metal grid without drilling into the ceiling. It supports up to 29.7 lbs and positions the unit 6.3 inches below the tiles. Adjustable arms accommodate most brands with mounting hole spacing from 5.25 to 12.5 inches. Mini projectors with 1.5 inch spacing are also supported by removing the extension arms.

Critical Fit Requirement

Measure every diagonal between the projector's mounting holes before ordering; all must be 12.5 inches or less for this mount to work. The supplier explicitly lists several Epson, Mitsubishi and LG models that do not fit, including the LS1100, 3010, 3200, 3700, 3800, 8350, 8500UB, 4010, XL25U and HU915QE. Buyers with wider hole patterns need a different mounting solution.

Installation And Common Issues

The scissor clamp attaches directly to the aluminum grid and all hardware plus instructions are included. The mount provides 15 degrees of tilt and swivel in either direction plus 360 degree rotation for precise aiming. Installers sometimes find the clamp slips if the grid rails are bent or painted; tightening the bolts fully and checking alignment prevents most problems.

Highlights

  • Install on drop-ceiling grids with the scissor clamp design
  • Holds projectors up to 29.7 lb for secure mounting
  • Adjustable arms fit mounting patterns from 5.25 to 12.5 inches
  • Tilt and swivel ±15° plus 360° rotation for optimal viewing
  • Arms remove to suit mini projectors with 1.5 inch spacing

Specifications

No published specifications for this item yet.

Questions about this item

How far below the ceiling grid does the projector hang once the scissor clamp is installed?

The mount positions the projector 6.3 inches from the ceiling grid when clamped to a standard drop ceiling.

What is the maximum distance between mounting holes on the projector that the adjustable arms can accommodate?

The arms support projectors with mounting-hole spacing up to 12.5 inches diagonally.

How much vertical clearance is needed above the ceiling tiles for the scissor clamp to grip the grid?

The scissor clamp attaches directly to the exposed metal grid; no extra plenum height is required beyond the grid itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.