We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
L-shaped corner standing desk, black top white steel frame, three-part top, push-button controller

VIVO

VIVO Black / White Electric Corner Standing Desk 75" x 63

SKU CH-CAP1-0EXBD

An electric L-shaped corner desk with a three-part top measuring 74.8 by 63 inches, single-motor height adjustment from 28.5 to 46.8 inches and a 176 lb weight capacity

  • Smooth height changes from 28.5 to 46.8 inches with a powerful single motor
  • Four memory presets on the push-button controller recall your ideal sitting and standing heights
  • Spacious L-shaped top measuring 74.8 by 63 inches fits multiple monitors and work materials
  • Sturdy steel frame with 2.4-inch wide legs supports up to 176 lbs for stable daily use
  • Reversible left or right return configuration adapts the desk to any corner layout

Corner Workstation for Active Workdays

The VIVO electric corner desk creates an L-shaped workstation measuring 74.8 by 63 inches when assembled, with a three-part top that supports monitors, laptops and accessories. A single motor lifts the surface from 28.5 to 46.8 inches, letting you alternate between sitting and standing throughout the day. The steel frame and particle-board tops are rated for 176 lbs of equipment.

Steady Lift Under Daily Load

The motor moves the desktop at up to 25 mm/s and holds position without drift when the control panel is released. With 2.4-inch-wide telescopic legs and a 22.8-inch foot length, the frame remains stable at full 46.8-inch extension even when loaded near the 176 lb limit. The 110-240V input maintains consistent speed across voltage ranges without thermal throttling during repeated cycles.

Assembly Configurable for Left or Right

The return desk bolts to either side of the main section, so you decide the orientation before tightening the frame. Pre-drilled holes in the 0.72-inch particle board align with the steel brackets, but the three top panels are heavy and require two people to flip once the base is built. The push-button controller with four memory presets plugs into a clearly marked port on the control box.

Highlights

  • Smooth height changes from 28.5 to 46.8 inches with a powerful single motor
  • Four memory presets on the push-button controller recall your ideal sitting and standing heights
  • Spacious L-shaped top measuring 74.8 by 63 inches fits multiple monitors and work materials
  • Sturdy steel frame with 2.4-inch wide legs supports up to 176 lbs for stable daily use
  • Reversible left or right return configuration adapts the desk to any corner layout

Specifications

No published specifications for this item yet.

Questions about this item

How loud is the motor when the desk runs at its maximum speed of 25 mm/s all day?

The motor operates at a maximum speed of 25 mm/s. Electric standing desks at this speed typically produce a low hum similar to a quiet office printer, suitable for continuous use in shared spaces.

Does the desk ship with a standard 110V–240V power cord, or do I need a special outlet?

The unit accepts 110V–240V input and includes a standard power cord for ordinary wall outlets. No dedicated circuit or special receptacle is required.

Will my existing monitor arms clamp onto the 0.72-inch thick particle-board top without extra reinforcement?

The 0.72-inch thick particle-board surface accepts standard C-clamps and grommet mounts rated for this thickness. Verify your arm’s clamp range covers 0.72 inches before installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.