We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 32 inch standing desk riser with dual monitor arms, particle board top and steel frame

VIVO

VIVO Black 32" Standing Desk Riser with Dual Monitor Mount office furniture

SKU CH-9FAK-TH07D

A 32-inch desk riser converts a fixed surface to sit-stand use with a 4.5 to 20 height range and holds two 13 to 30 screens on a full-motion mount

  • Smooth sit-stand transitions with 4.5 to 20 height range
  • Dual monitors up to 30 inches on VESA 75x75mm or 100x100mm
  • Full motion arms with 45 tilt, 180 swivel and 360 rotation
  • Spacious 31.5 by 15.7 desktop plus 31.3 by 11.8 keyboard tray
  • Sturdy steel frame supports 33 lbs on top surface and 17.6 lbs per screen

Workstation Converter with Dual Arms

This 32 inch desk riser converts an existing surface into a sit-stand workstation and includes a dual monitor mount. It supports two screens from 13 to 30 inches with VESA 75x75mm or 100x100mm patterns up to 17.6 lbs each. The desktop holds 33 lbs and the keyboard tray holds 4 lbs. It suits users who want height flexibility without replacing their desk.

Height Range and Articulation

The riser adjusts from 4.5 to 20 inches using a squeeze-handle lock mechanism for smooth transitions. The monitor arms provide +45° to -45° tilt, 180° swivel and 360° rotation along a 15.5 inch pole with 31 inch arm span. Screens can be set in portrait or landscape orientation. The steel frame and particle board surfaces remain stable throughout the range.

Minimal Assembly and Mounting

The package includes all hardware, instructions, removable VESA plates and a heavy-duty grommet mount for the monitor stand. Only the keyboard tray, monitor arms and stand require attachment before screen installation. The grommet mount secures the pole to the riser for added height adjustment. No wall mounting or separate tools are needed.

Highlights

  • Smooth sit-stand transitions with 4.5 to 20 height range
  • Dual monitors up to 30 inches on VESA 75x75mm or 100x100mm
  • Full motion arms with 45 tilt, 180 swivel and 360 rotation
  • Spacious 31.5 by 15.7 desktop plus 31.3 by 11.8 keyboard tray
  • Sturdy steel frame supports 33 lbs on top surface and 17.6 lbs per screen

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I attach the monitor arms to the 32 inch riser and avoid the step most people miss?

Bolt the arms to the centre pole using the grommet mount, then clip each screen onto its removable VESA plate; the step often missed is tightening the grommet clamp firmly before adding the monitors.

What parts will need checking or replacement after months of daily height changes?

The gas-spring height-lock mechanism, the pole-mounted arm joints, and the VESA plate screws should be inspected periodically; the particle-board desktop and keyboard tray may show wear if loads exceed 33 lbs and 4 lbs respectively.

At what point does the riser stop moving smoothly during repeated sit-stand cycles?

The desktop locks at 20 inches above the base; exceeding the 33 lb desktop limit or the 4 lb keyboard-tray limit will cause the mechanism to bind before reaching that height.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.