VIVO
VIVO 71 x 30 Dual Motor Standing Desk Dark Gray Top Gray Frame
A 71 x 30 inch electric standing desk with a one-piece dark gray top, dual motors, 29.5 to 48.3 inch height range, 220 lb capacity, and three memory presets
- Smooth sit-stand transitions with dual-motor electric lift
- Spacious 70.9 x 29.5 inch one-piece desktop for multi-monitor setups
- Height adjusts from 29.5 to 48.3 inches for ergonomic comfort
- Sturdy steel frame supports up to 220 lbs capacity
- Three memory presets on push-button controller save preferred heights
Active Workstation For Daily Use
The VIVO 71 x 30 Dual Motor Standing Desk delivers a complete sit-stand solution with a 70.9 x 29.5 inch one-piece dark gray top. Dual electric motors adjust the surface from 29.5 to 48.3 inches at 25mm per second. A push-button controller stores three height presets for quick changes throughout the day. The steel frame supports up to 220 lbs for stable multi-monitor configurations.
Thermals Noise And Power Draw
Electric dual motors operate from a 100V-240V input without audible cooling fans or measurable heat output during normal adjustments. Power consumption peaks only while the legs telescope and returns to standby levels once the target height is reached. The all-steel frame absorbs vibration so the desktop remains steady at any position between 29.5 and 48.3 inches. No active thermal management is required for typical office workloads.
Bundled Controller And Hardware
The included push-button handset adds three programmable memory slots so users can recall exact heights without manual fine-tuning. All mounting hardware and assembly instructions ship in the box for immediate setup. Each foot measures 23 x 2.3 inches to distribute the 220 lb capacity evenly across the floor. No additional software or accessories are needed to use the height presets.
Highlights
- Smooth sit-stand transitions with dual-motor electric lift
- Spacious 70.9 x 29.5 inch one-piece desktop for multi-monitor setups
- Height adjusts from 29.5 to 48.3 inches for ergonomic comfort
- Sturdy steel frame supports up to 220 lbs capacity
- Three memory presets on push-button controller save preferred heights
Specifications
No published specifications for this item yet.
Questions about this item
How do I attach the 70.9 x 29.5 top to the steel frame, and what step is often missed?
Bolt the one-piece particle-board top to the pre-drilled frame brackets using the supplied hardware; the step people skip is tightening every bolt in a cross pattern so the 220 lb capacity is evenly distributed.
Which component will need attention first after daily height changes?
The dual-motor drive system and telescopic legs carry the full load; inspect the motor mounts and leg glides periodically for play or noise, as they wear before the steel frame or particle-board top.
At what point does the 25 mm/s speed drop during a long raise or lower cycle?
Speed stays at 25 mm/s until the controller detects thermal limits in the dual motors; sustained full-stroke cycles from 29.5 to 48.3 inches will trigger a slowdown first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



