We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VIVO

VIVO 36" Black Standing Desk Riser Dual Monitor Stand 13-30" VESA 75/100

SKU CH-1WXJ-BNTE3

A 36-inch black desk riser with dual monitor arms fits two 13 to 30 screens up to 22 lbs each on VESA 75 or 100 mounts and lifts 6.5 to 17 inches with a squeeze handle

  • TypeDesks & Laptop Stands
  • ColorBlack
  • Sizes/Dimensions36"
  • Dual monitor support for 13 to 30 inch screens with VESA 75/100 mounting
  • Smooth sit-to-stand transition from 6.5 to 17 inches using a handle lock
  • Full motion arms with 90 degree tilt, 180 degree swivel and 360 degree rotation
  • Sturdy steel frame holds 22 lbs per monitor and 33 lbs on the desktop
  • Minimal assembly with removable VESA plates and included hardware

VIVO 36″ Black Desk Riser with Dual Monitor Mount

This desktop riser converts a fixed-height desk into a sit-stand workstation and includes a dual-monitor arm that clamps through the grommet hole. The 36 by 22 inch top surface holds a monitor pair plus accessories while the keyboard tray sits below. Height changes from 6.5 to 17 inches using a squeeze handle.

Who This Suits and Who Should Look Elsewhere

The kit fits two screens sized 13 to 30 inches, each up to 22 lbs, with VESA 75×75 or 100×100 mounting holes. It suits users who want both monitors on a single articulated arm with +90° to –90° tilt, 180° swivel and 360° rotation. Buyers needing independent arms for three or more screens, or screens heavier than 22 lbs, cannot use this riser.

Deciding Specification: 33 lb Desktop Weight

The riser top supports up to 33 lbs and the keyboard tray up to 4 lbs. If your combined monitor, mount and accessory weight exceeds 33 lbs you must choose a higher-capacity riser. All other adjustments — height range, articulation, VESA pattern — are fixed by the design.

Highlights

  • Dual monitor support for 13 to 30 inch screens with VESA 75/100 mounting
  • Smooth sit-to-stand transition from 6.5 to 17 inches using a handle lock
  • Full motion arms with 90 degree tilt, 180 degree swivel and 360 degree rotation
  • Sturdy steel frame holds 22 lbs per monitor and 33 lbs on the desktop
  • Minimal assembly with removable VESA plates and included hardware

Specifications

TypeDesks & Laptop Stands
BrandVIVO
ColorBlack
Sizes/Dimensions36"

Questions about this item

How do I install the riser and dual monitor stand, and which step is most often done incorrectly?

Attach the keyboard tray to the riser, mount the monitor arms to the stand, secure the stand to the riser with the grommet mount, then install screens using the removable VESA plates. The step most often done incorrectly is not tightening the grommet mount fully, which can let the stand shift under load.

What maintenance or replacement will this unit need over time?

Periodically check and re-tighten the height-locking handle, grommet bolt, and VESA plate screws. The gas-spring mechanism in the riser and the arm joints may lose smoothness after extended daily cycling; lubricate pivot points if motion becomes stiff.

What limit appears first during sustained daily height changes and monitor repositioning?

The 33 lb desktop capacity and 22 lb per screen arm limit are reached before the 6.5 to 17 inch riser range or the 180° swivel/360° rotation stops. Exceeding either weight rating will cause the locking mechanism to slip or the arms to sag.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.