We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld 4.3 inch screen locator unit with coiled 30m cable and stainless steel camera head

visiPower

visiPower 4.3" Sewer Inspection Locator with 512Hz Sonde 30m Cable

SKU CH-JNW3-MXXBV

A 4.3" screen sewer inspection locator with a 512Hz sonde, IP68 camera, 1200TVL resolution, 145° view, 8 LEDs, DVR recording on a 16GB card, and 30m cable

Options Cable Length 20m/65ft

  • DVR records video and photos on included 16GB TF card
  • 512Hz transmitter locates pipe damage up to 5m depth
  • IP68 camera with 8 LEDs and 145° view for dark pipes
  • 3" screen shows live 1200TVL inspection footage
  • Receiver runs 10 hours on 3.7V 3000mAh battery

Sewer Inspection Locator with 4.3" Screen

The visiPower unit combines a 4.3 inch colour display with a 30 metre push cable and a 512Hz sonde for tracing underground drainage lines. It is built for plumbers and drainage contractors who need to locate blockages, collapses or misaligned joints without excavation. The IP68-rated camera head carries eight adjustable LEDs and a 145 degree wide viewing angle for clear visuals in dark pipes.

Installation Notes and Common Issues

The system ships with a 16GB TF card pre-installed in the built-in SD slot so recording can start immediately after charging the 3.7V 3000mAh lithium battery. A 5V1A charger is included and the receiver runs for about ten hours per charge. Users should verify the sonde signal reaches the receiver at the expected five metre depth before committing to a long push, and clean the stainless-steel camera window after each use to maintain the 1200TVL image quality.

Deciding Specification — 512Hz Locator Frequency

The 512Hz transmitter and matching receiver determine whether this kit can trace the specific pipe material and depth on your site; lower frequencies travel further in cast iron or concrete while higher frequencies suit plastic. If your work requires a different locating frequency or a longer detection range than the stated five metres, this unit will not meet the requirement.

Highlights

  • DVR records video and photos on included 16GB TF card
  • 512Hz transmitter locates pipe damage up to 5m depth
  • IP68 camera with 8 LEDs and 145° view for dark pipes
  • 3" screen shows live 1200TVL inspection footage
  • Receiver runs 10 hours on 3.7V 3000mAh battery

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I verify the 512Hz locator is detecting the sonde correctly after setup?

The receiver shows signal strength across six gears and offers Far/Near detect modes; a strong reading on the display confirms the sonde is located.

What comes in the box and what must I purchase separately?

The kit includes the 4.3" monitor, IP68 camera with 8 LEDs, 30m cable, 512Hz sonde and receiver, a 16GB TF card, and a 5V1A charger; no extra items are required for basic operation.

Which capacity TF card should I use for DVR recording?

A 16GB TF card is supplied and fits the built-in slot, providing storage for video clips and photos captured during inspections.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.