We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducer coupling with press-fit ends, straight body, EPDM O-rings visible

Viega

Viega ProPress 2915.2 Copper Reducer coupling 1-1/2 in x 1-1/4 in

SKU CH-6VP8-TVCH1

Copper reducing coupling joins 1-1/2 in and 1-1/4 in tubing with press-fit ends, EPDM seals, 200 psi and 250 °F ratings

  • Reduces copper tube size from 1-1/2 to 1-1/4 in with press-fit ends
  • Press-fit connection eliminates open-flame soldering for faster installation
  • EPDM O-ring seals up to 200 psi and 250 Degrees F operating limits
  • Copper construction resists corrosion in potable water systems
  • Straight reducing connector measures 2 31/32 in overall length

Copper reducer for potable water systems

This Viega ProPress coupling joins 1-1/2 in and 1-1/4 in copper tubing using press-fit connections on both ends. It is intended for installers working on potable water lines who need a straight reducing connector made from copper with an EPDM O-ring seal. The fitting carries model number 2915.2 and measures 2 31/32 in overall length.

Rated for 200 psi and 250 Degrees F

The fitting handles typical residential and light commercial water pressures up to 200 psi and continuous temperatures up to 250 Degrees F. It is not suited for applications that exceed these limits or for systems requiring threaded, soldered or flanged joint methods. Installers needing higher pressure ratings or different temperature ranges must select an alternative component.

Press-fit ends eliminate soldering

Both press-fit connections remove the need for open-flame soldering, reducing installation time and fire risk on site. The integral EPDM O-ring provides the seal once the joint is pressed with a compatible tool. No separate gaskets, fluxes or solder are supplied or required, and the straight body adds no directional change to the pipe run.

Highlights

  • Reduces copper tube size from 1-1/2 to 1-1/4 in with press-fit ends
  • Press-fit connection eliminates open-flame soldering for faster installation
  • EPDM O-ring seals up to 200 psi and 250 Degrees F operating limits
  • Copper construction resists corrosion in potable water systems
  • Straight reducing connector measures 2 31/32 in overall length

Specifications

BrandViega

Questions about this item

Will the 1-1/2 in press end seal onto my existing 1-1/2 in copper tube without re-threading?

Yes, the press-fit end is made for 1-1/2 in copper tube size and seals with the factory EPDM O-ring when pressed.

How can I confirm the joint is watertight after pressing?

Pressurise the line up to 200 psi and hold at 250 °F maximum; no leakage means the press is sound.

Does the package include the press jaws or any sealant?

The box contains only the copper reducer with its installed EPDM O-ring; press jaws and pipe are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.