We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zinc nickel-plated steel press-fit tee, three 2 in connections

Viega

Viega MegaPressG tee 25326 2 in press-fit steel

SKU CH-KXD3-SB0EX

Steel press-fit tee with HNBR seals for 2 in non-potable water lines rated to 125 psi and 180 °F

  • Press-fit ends install quickly without threading or welding
  • Steel body with zinc nickel coating resists corrosion in non-potable systems
  • HNBR O-ring seals up to 125 psi at 180 °F
  • Three 2 in press connections create a secure tee junction
  • Supplied new as Viega MegaPressG model 25326

Viega MegaPressG tee for non-potable water

This press-fit steel tee connects three 2-inch pipes in non-potable water systems. It is intended for professional plumbers and facility maintenance crews who need a permanent, corrosion-resistant joint without welding. The zinc nickel-plated finish and HNBR O-ring suit the stated pressure and temperature limits.

Install with a compatible press tool and jaw

A calibrated press tool with the correct jaw size forms the joint in seconds; no threading, soldering or open flame is required. The most common error is pressing with a worn or mismatched jaw, which can leave an incomplete seal. Always verify the tool calibration and jaw profile before starting the job.

Confirm pipe size, pressure and temperature ratings

Ensure the existing pipe is 2-inch steel rated for at least 125 psi and 180 °F service. Check that the system fluid is compatible with HNBR O-ring material and that local codes allow press-fit fittings for the intended non-potable application.

Highlights

  • Press-fit ends install quickly without threading or welding
  • Steel body with zinc nickel coating resists corrosion in non-potable systems
  • HNBR O-ring seals up to 125 psi at 180 °F
  • Three 2 in press connections create a secure tee junction
  • Supplied new as Viega MegaPressG model 25326

Specifications

BrandVIEGA MEGAPRESSG

Questions about this item

How can I confirm the MegaPressG tee 25326 is sealed correctly after pressing?

After pressing, perform a pressure test up to 125 psi and check for leaks at all three 2 in press-fit connections; the HNBR O-rings and zinc nickel-plated steel body should hold without weeping.

What comes with the 25326 tee and what must I supply?

The fitting itself is supplied ready to press with HNBR O-rings installed; you must provide 2 in steel pipe, a compatible press tool and jaws, and any thread sealant or supports required by your installation.

Which MegaPressG tee version should I choose for a 2 in non-potable water line?

The 25326 is a 2 in x 2 in x 2 in press-fit steel tee rated for 125 psi and 180 °F, making it the correct version for 2 in non-potable water applications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.