We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Viega MegaPressG carbon steel reducer, 1 inch by 3/4 inch press fitting

Viega

Viega MegaPressG 6615.1 Carbon Steel Reducer 1 in x 3/4 in

SKU CH-5K5B-7RHET

Carbon steel reducer connects 1 in street to 3/4 in press for fuel gas systems rated to 125 psi from -40 to 180 degrees F

  • Reduces pipe size from 1 in to 3/4 in for flexible gas line design
  • Carbon steel construction handles up to 125 psi for durable fuel gas service
  • Operates from -40 °F to 180 °F covering wide temperature ranges
  • Meets ANSI LC4/CSA 6.32 and NFPA 54/58 for code-compliant installations
  • Street x press connection enables fast, flameless press-tool joints

Carbon Steel Reducer 1 in x 3/4 in

The Viega MegaPressG 6615.1 is a carbon steel fitting designed to join a 1 inch pipe to a 3/4 inch pipe in fuel gas distribution systems. It is intended for professional installers who need a press-connect reducer that meets recognised fuel gas codes.

Street x Press connection for press-tool

The fitting uses a Street x Press connection type, so it requires a compatible press tool and jaw set to complete the joint. No threading, welding or soldering is needed, which reduces installation time and eliminates open flame on the job site.

Rated to 125 psi from -40 to 180 °F

The reducer handles pressures up to 125 psi across a temperature range of -40 to 180 degrees Fahrenheit. It is listed to ANSI LC4/CSA 6.32 and complies with NFPA 54 and NFPA 58, but it is not suited for applications that exceed these pressure or temperature limits.

Highlights

  • Reduces pipe size from 1 in to 3/4 in for flexible gas line design
  • Carbon steel construction handles up to 125 psi for durable fuel gas service
  • Operates from -40 °F to 180 °F covering wide temperature ranges
  • Meets ANSI LC4/CSA 6.32 and NFPA 54/58 for code-compliant installations
  • Street x press connection enables fast, flameless press-tool joints

Specifications

BrandViega

Questions about this item

Will the 125 psi rating hold during continuous gas-line service?

The reducer is rated for a maximum pressure of 125 psi, which applies to sustained operation in fuel-gas distribution systems.

How does the carbon-steel body handle the -40 to 180 °F temperature range day after day?

The material and press connection are tested to ANSI LC4/CSA 6.32 and NFPA 54/58, confirming performance across the full -40 °F to 180 °F range.

Which press tool and jaw set are required to install the 1 in x 3/4 in MegaPressG connection?

A compatible MegaPressG press tool with the correct 1 in and 3/4 in jaw inserts is needed to form the press ends on carbon-steel pipe.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.