We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel reducing tee with three press-fit ends, brushed metallic finish

Viega

Viega Megapress Stainless 316 Reducing Tee 90130 3/4" x 3/4" x 1/2

SKU CH-9X1T-82ENJ

Stainless-steel 316 reducing tee with three press-fit connections joins 3/4" and 1/2" tubing for potable water at 200 psi and 250 °F

  • Press-fit connection installs without welding or threading
  • Reducing tee joins 3/4 in and 1/2 in lines in one fitting
  • 316 stainless steel body resists corrosion in potable water
  • EPDM O-ring seals to 200 psi and 250 °F
  • Compact 4 17/32 in length fits tight spaces

Reducing Tee 3/4" x 3/4" x 1/2

The Viega Megapress Stainless 316 reducing tee joins three press-fit connections in potable-water systems. Two 3/4 in branches and one 1/2 in branch allow a smaller line to split from a main run without additional adapters. It is suited for installers who need a single fitting to handle the transition.

Press-fit ends with EPDM seals

Each outlet uses a press-fit connection that locks onto stainless tubing when crimped with the correct tool, eliminating threading or soldering on site. The 316-grade stainless body resists corrosion in aggressive water conditions while the EPDM O-rings maintain a watertight seal up to 200 psi and 250 °F. Overall length is 4 17/32 in for tight routing.

Replaces threaded or soldered tees

This fitting replaces separate reducers and tees that would otherwise require multiple joints and more labour. The jump is worth it when a project demands fewer leak paths, faster assembly and the long-term durability of 316 stainless in potable-water service.

Highlights

  • Press-fit connection installs without welding or threading
  • Reducing tee joins 3/4 in and 1/2 in lines in one fitting
  • 316 stainless steel body resists corrosion in potable water
  • EPDM O-ring seals to 200 psi and 250 °F
  • Compact 4 17/32 in length fits tight spaces

Specifications

BrandViega Megapress Stainless 316

Questions about this item

What pressure does the press-fit connection handle at 250 °F?

The 316 stainless press-fit tee is rated for 200 psi at 250 °F, with EPDM O-rings on all three ports.

How much space does the 4 17/32 in overall length need in a trench?

The reducing tee measures 4 17/32 in end-to-end, so allow that clear span plus tool swing room for the press jaws.

Which jaw profile seals the 1/2 in branch on a Megapress 90130?

Use a standard Megapress jaw set; press the 3/4 in run ports first, then the 1/2 in branch, ensuring each O-ring seats fully before the next crimp.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.