We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel reducing tee with three press-fit ends, satin finish

Viega

Viega Megapress Stainless 316 Reducing Tee 1" x 1" x 1/2" 90135

SKU CH-M3E2-KFBP0

Connects 1" and 1/2" stainless pipes with press-fit ends rated to 200 psi and 250 °F

  • Reducing tee joins 1 in and 1/2 in press lines
  • 316 stainless steel resists corrosion in potable water systems
  • EPDM O-ring seals up to 200 psi working pressure
  • Rated for 250 °F maximum operating temperature
  • Press-fit connections install without threading or soldering

Reducing Tee for Press-Fit Systems

This Viega Megapress fitting joins three press-fit connections in a reducing tee configuration. Two ends accept 1 inch tube and the third accepts 1/2 inch tube, allowing a branch line to be added without threading or soldering. It is intended for potable water installations where a flame-free joint is required.

Pressure and Temperature Limits

The fitting is rated for a maximum operating pressure of 200 psi and a maximum operating temperature of 250 degrees F. These limits define the safe envelope for hot and cold water distribution. Installers must verify that system design conditions stay within both values at all times.

316 Stainless Construction with EPDM Seal

The body is made from 316 grade stainless steel for corrosion resistance in aggressive water conditions. An EPDM O-ring provides the seal at each press connection. The overall length is 5 5/32 inches, so the assembled joint occupies a fixed, compact space in the pipe run.

Highlights

  • Reducing tee joins 1 in and 1/2 in press lines
  • 316 stainless steel resists corrosion in potable water systems
  • EPDM O-ring seals up to 200 psi working pressure
  • Rated for 250 °F maximum operating temperature
  • Press-fit connections install without threading or soldering

Specifications

BrandViega Megapress Stainless 316

Questions about this item

Which Megapress Stainless 316 reducing tee should I choose for a 1 inch main line with a 1/2 inch branch?

The 90135 model is built for exactly that layout: 1 inch press-fit on the run and 1/2 inch press-fit on the branch, all in 316 stainless with EPDM seals.

What does the 200 psi rating mean when the fitting is installed in a potable water system?

It confirms the crimped joint will hold up to 200 psi at temperatures up to 250 °F without leaking or blowing off.

How does the press-fit connection standard limit the tools and pipe I can use with this tee?

You must use a compatible Megapress press tool and 316 stainless pipe sized to 1 inch and 1/2 inch; other press systems or thread types will not seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.