Viega Megapress Stainless 304 Adapter 1" x 1" 95245

Stainless 304 MegaPress Adapter

The Viega MegaPress adapter joins two 1-inch tubes in a press-fit connection. It is made from 304 stainless steel for corrosion resistance in plumbing and mechanical systems. Installers use it where soldering or threading is impractical or prohibited. The fitting suits commercial and residential pipework that demands a clean, permanent joint.

Leak-tight seal without flame

The press profile creates a metal-to-metal seal that holds pressure without the heat, flux or open flame of traditional brazing. No hot-work permit is required, so the adapter can be installed in occupied buildings or fire-sensitive zones. Joint integrity is verified by the visible press indicator on each connection. The 304 alloy resists scaling and maintains strength under normal service temperatures.

Ready to press from the box

Each adapter arrives factory-clean with the press bead and identification marks already formed. No additional cutting, deburring or surface preparation is needed before the press tool engages. The single-piece body eliminates loose components that could be misplaced on site. Installers simply align, press and move to the next joint.