We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zinc nickel-plated steel reducing tee with three press-fit connections

Viega

Viega MegaPress Reducing Tee 25350 1-1/4 x 1-1/4 x 1 in

SKU CH-2JKE-9DJ1K

Steel reducing tee joins three press-fit lines at 200 psi with EPDM seals

  • Reducing tee connects three press-fit lines in one fitting
  • Zinc-nickel coating protects steel body against corrosion
  • EPDM O-ring seals air and non-potable water systems
  • Rated for 200 psi maximum operating pressure
  • Overall length 6 15/32 in fits compact installations

Reducing Tee for Press-Fit Systems

This Viega MegaPress reducing tee connects three press-fit pipes in a single junction. Two outlets accept 1-1/4 inch pipe while the branch takes 1 inch pipe, allowing a straightforward step-down in pipe size. The steel body carries a zinc nickel-plated finish and EPDM O-rings for sealing. It suits air and non-potable water lines.

Sustained Pressure Performance

The fitting is rated for a maximum operating pressure of 200 psi, so it maintains integrity under continuous system load rather than only during brief spikes. Crimp-style press connections create a permanent mechanical bond that resists vibration and thermal cycling. Steel construction prevents the creep that can affect softer metals over time.

Steel Build and Press-Fit Connections

Zinc nickel plating protects the steel body from corrosion in damp plant rooms or exposed runs. Each of the three ports uses the same press-fit profile, so a single press tool handles every joint without switching jaws. The overall length of 6 15/32 in fits standard fitting allowances in tight trenches or behind equipment. EPDM seals suit the stated air and non-potable water applications.

Highlights

  • Reducing tee connects three press-fit lines in one fitting
  • Zinc-nickel coating protects steel body against corrosion
  • EPDM O-ring seals air and non-potable water systems
  • Rated for 200 psi maximum operating pressure
  • Overall length 6 15/32 in fits compact installations

Specifications

BrandVIEGA

Questions about this item

Does the EPDM O-ring material on the Viega MegaPress 25350 resist heat buildup during all-day pressurised operation?

The EPDM O-ring is rated for continuous service within the 200 psi maximum operating pressure, so heat from sustained flow stays within the material limits.

What press tool and jaw size must I already own to install the 1-1/4 in and 1 in press-fit connections?

You need a compatible press tool with 1-1/4 in and 1 in MegaPress jaws to crimp each connection on the zinc nickel-plated steel body.

Will the 6 15/32 in overall length of this reducing tee align with existing 1-1/4 in steel pipe runs without extra couplings?

The 6 15/32 in centre-to-end dimension matches standard MegaPress spacing, so it fits directly into existing 1-1/4 in press-fit piping.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.